<- dx:v7:on_air_switch|On-Air-Switch ^ dx:v7:start|52/DX Configuration ^ dx:v7:authorisation|Authorisation -> ======Users====== On the ''Users'' page you can create users with different access rights. [{{ :dx:v7:users_dx.png?nolink |//DXConfig Software - Users//}}] You can create users with different access rights by assigning them to the preconfigured user groups. To do this, follow these steps: - In the ''User List'' area, click ''Add User'' to create a new user. - In the ''Edit User'' area, in the User Name box, type a distinctive user name, for example "technician". - In the ''Personal PIN'' box, enter a four-digit PIN code, which identifies the user at the log in process on the console. - In the ''Member of Groups'' area, select one or more user groups to assign the selected user to these groups. You can log out the users automatically after a defined duration. After this duration the user has to log in again. Choose this duration from the ''Autolock'' drop-down menu. You can select ''2'', ''5'', ''10'', ''15'', ''20'' or ''30'' minutes or select ''Off'' to disable this feature. **Note**\\ The ''Display User Name'' check box has no function for 52/DX devices.