<- dx:v7:start|DX Configuration Manual ^ dx:v7:start|52/DX Configuration ^ dx:v7:dx_module|52/DX control module ->


======XS Core - DSP unit======

The powerful 52/XS Core is an independent DSP system which does not require a PC for operation. There are no fans, hard discs or batteries inside the 52/XS Core and in the I/O boxes, allowing silent and low-maintenance operation directly in the studio.

High-performance 40-bit floating-point digital signal processing for:

  * 3-band fully parametric equalizers, subsonic filter, dynamics, limiter, delay for all 16 fader channels, mono or stereo
  * 32 summing busses (mono), Aux busses, clean feeds and PFL
  * 6 clean feeds (mix-minus, mono or stereo)
  * 4 monitoring busses for control room and studio support
  * flexible talkback, logic and GPIO system
  * integrated routing matrix
  * internal tone generator
  * Gigabit audio network for 512 input and 512 output channels for low-latency interconnection between 52/XS cores or to other DHD products
  * internal or external 48 kHz or 44.1 kHz sync

Other features of the XS Core:

  * highly efficient external wide-range power supply, Energy Star Level V, redundancy option
  * minimal system power consumption
  * expandable modular system allows optional integration of other DHD product lines
  * serial or TCP/IP interface options to radio automation or other external control systems

<WRAP center round tip 80%>
**Tip**\\  For more information on the Core Types, see [[http://dhd-audio.de/dhd_files/52dx/manual/html/52dx_modules_en/index.html|Module List]].
</WRAP>

===== XS Core =====

[{{ :dx:52-1804_rear_view.zoom50.png?nolink |//Rear View of 52-1804//}}]

In the following table the main features of the 52-1804 are listed.

|**Feature**|{{:wiki:rot.png?nolink|}}**52-1804**|
|support for redundant power supply|yes|
|number of supported faders|4|
|number of supported I/O boxes|3|
|number of audio, power & control ports (APC)|4|
|serial interface for external control|yes|
|TCP/IP interface for external control|yes|