====== Connect a 52-6585A pushbutton module to a 52-6509A GPIO push button module ======
The 52-6585A is a passive pushbutton module that can be mounted into a furniture without a direct connection to a controller.
This module has to be connected using GPIO to a [[https://dhd.audio/product/526509a/|52-6509A]] module via a 1:1 ribbon cable. A 1 meter ribbon cable is included with 52-6585A. 

[{{:installation:52-6585_and_52-6509.png?direct|//52-6585 Pushbutton Module, 5 buttons (with example button labels) and 52-6509 GPIO push button module//}}]

The 52-6509A can be mounted into 52/MX console frames, 52/MX table installation frames or Q-panels.

===== Power =====
The 52-6585A is powered by the 52-6509A.

<WRAP center round important 80%>
**Important**\\  The 52-6585A is designed for use with 52-6509A only. It is not recommended to use other GPIO or power supply to avoid damage by using wrong voltage. 
</WRAP>

/*

===== LED colours =====
The pushbuttons of the 52-6585 support 2 colours - red and green.
To use one colour you need one connection to a 52-6509.
To use both colours you need a second connection to a second 52-6509.

 */