====== Internal Console Controller ======

===== 52-4060A controller =====
The analog audio connectors of the 52-4060 controllers are designed for internal use only:

  * the output level is not compatible, less than standard line output levels of +4dBu or +6dBu
  * the output has no short circuit protection, therefore a external use is not allowed
  * THD+N of digital to analog converter is equivalent to the THD+N of 52-4527B and 52-4424B PFL / Talk back amplifier circuits & speaker, for headphone or monitoring use the THD+N would be too large
  * the lower corner frequency response is limited to around 100 Hz, this is not useful for use with headphones or for monitoring
  * internal 48V is on the same connector, misuse may damage the external device or the 52-4060 controller
  * only 52-4527 and 52-4424 devices allowed to connect to the 52-4060 controller
 

-> use 52-7235A or 52-7224A or 52-1335A (or 52-7230A or 52-7222A or 52-7223A or 52-1330A/B) for connection of external analog equipment

===== Controller ports on 52-4510A TFT display =====
[{{ :installation:52-4510_pcb_module-connectors.jpg?800 |//Port numbering on 52-4510A PCB//}}]

FIXME Pinbelegung bzw. Zeichnung entspr. [[http://www/dhd/dhd_files/52mx/manual/html/52mx_modules_en/52-4060_audio-wiring_52-4xxx_1.pdf|4592B]] erstellen und einfügen
LSP-Buchse ist der 5-polige Anschluss in der Mitte.
/* ===== 52-4050B controller ===== */