<- midi:installation|Installation ^ midi:start|MidiControl Software ^ midi:menus|Menus -> ====== User Interface ====== ===== Main Window ===== The main window shows the log messages in a list. Under normal circumstances it is only needed during the configuration process. After the configuration is finished, the log messages should be reduced to a minimum to save the resources of the PC. [{{ :midi:ui.png?nolink |dbc MIDI control software main window}}] ===== Toolbar ===== Via the toolbar it is possible to use some of the menu functions directly. [{{ :midi:clip0010.png?nolink |Toolbar of dbc MidiControl Software}}] * {{:midi:clip0024.png?nolink|}} Einstellungen - Opens the Einstellungen (settings) window, wherein the configuration of the MidiControl software can be done. * {{:midi:clip0023.png?nolink|}} Connect - Establishes the connection to the mixing console. * {{:midi:clip0022.png?nolink|}} Disconnect Interrupts the connection to the mixing console. * {{:midi:clip0025.png?nolink|}} Info - Shows an about window. ===== Status Bar ===== The status bar at the bottom of the window shows information on the communication state. [{{ :midi:clip0012.png?nolink |Status Bar of dbc MidiControl Software}}] * **Mixer** - Shows the IP address of the mixing console. * **Type** - Displays the type of the MIDI controller. * **MIDI RX** - Shows the number of received MIDI commands. * **MIDI TX** - Shows the number of transmitted MIDI commands. * **Mixer RX** - Displays the number of received TCP/IP packets from the mixing console. * **Mixer TX** - Displays the number of transmitted TCP/IP packets to the mixing console. * **Timecode** - Shows the current time code.