<- om:rc:creating_views|Creating Views ^ om:start|Operation Manager ^ om:rc:example_views|Example views ->


======Using Remote Control Views======

Double click a remote view in the ''Remote Control'' branch to open the desired remote control view. For a better workflow, it is possible to open several remote control views at once in different tabs to quickly switch between them. 

Which elements are shown in a remote view depends on the configuration of the view (see [[om:rc:creating_views|Creating Remote Control Views]]). 

<WRAP center round info 80%>
**Note**\\  The control elements of the remote view can be arranged in another way than the hardware interface.
</WRAP>

Basically, all elements are working in an analogous manner as the elements of the hardware modules.

==== Fader Behaviour ====

You can move a fader up and down using drag'n'drop. You can also set special values directly: 

  * Press ''Ctrl'' key and click the desired fader with the left mouse button to set the fader to 0dB. 
  * Press ''Alt'' key and click the desired fader with the left mouse button to set the fader to -oodB (OFF)
  * Press ''Shift'' key and click the position you are pointing and clicking to. The fader jumps directly to this position.

==== Hardware Encoder Behaviour ====

The hardware encoders are represented in the remote control software by the following symbol:  {{:om:rc:encoder.png|}}. 

The functions of the encoder are split to three buttons:
  * Upper button {{:om:rc:encoder_oben.png|}}: increment a value like turning the encoder to the right.
  * Lower button {{:om:rc:encoder_unten.png|}}: decrement a value like turning the encoder to the left.
  * Center button {{:om:rc:encoder_mitte.png|}}: Simulate pressing the encoder. 
 
<WRAP center round info 80%>
**Note**\\  Potentiometers are not remote controllable.  
</WRAP>


==== Remote control tab options: ====

|**Symbol**|**Name**|**Function**|
|  {{:om:rc:zoom_-symbol.jpg|}}  |Zoom In|Increases the remote control view.|
|  {{:om:rc:zoom--symbol.jpg|}}  |Zoom Out|Decreases the remote control view.|
|  {{:om:rc:auto-window-size_symbol.png|}}  |Auto Adjust Window Size|If the remote view is undocked and is displayed in a separate window, you can use this function to fit the zoom level to the size of the window.|

==== Using remote control with DSP control software ====

If the device holds a DHDOM DSP Control software license and the fader strips of the remote view include Access keys, the DSP parameters of a fader channel can be displayed in a separate window. Therefore, press and hold the Ctrl key on your keyboard and click the Access button of the desired fader strip.

<WRAP center round tip 80%>
**Tip**\\  See [[om:dsp:controlling_parameters|DSP control - controlling parameters]] for more information.
</WRAP>