<- om:rs:quick_monitor_buttons|Quick Monitor Buttons ^ om:start|Operation Manager ^ om:rc:start|Remote Control Software -> ======Monitoring Sources====== Choose the entry ''Workstations'' in the ''Administration'' menu. The ''Workstation Configuration'' window appears. On the ''Quick Monitor Sources'' tab, you can define which sources are provided on which workstation for monitoring applications. Thus a user can listen to signals even if he has no access to the matrices that include the signals. [{{ :om:rs:monitoring_sources.png |//Enable monitoring sources//}}] Select the workstation you want to handle in the list on the left-hand side. Enable the sources of the matrices for each workstation by activating the checkboxes. Press ''Apply'' to save your settings if you want to continue with the workstation configuration or press ''OK'' to save and close the ''Workstation Configuration'' window. It is possible to undo all settings and reload the state you had saved last by pressing ''Cancel''. The enabled sources are now available on the ''Monitoring Sources'' tab and can be used directly or to assign them to quick monitor buttons. Double click the entry ''Monitoring'' in the list on the left-hand side of the DHDOM window to open this tab. [{{ :om:rs:monitoring_sources_tab.png |//The monitoring tab shows all available monitoring sources//}}] Click the loudspeaker symbols next to the sources to listen to the signals or use drag'n'drop to assign the sources to quick monitor buttons.