<- om:rs:matrix_menu|Matrix Menu ^ om:start|Operation Manager ^ om:dsp:menu|DSP Control Menu -> ======Schedule Menu====== The ''Schedule'' menu only appears if at least one matrix is configured and activated for scheduling and the dedicated scheduling tab is selected. **Note**\\ All the following functions are also situated on scheduling tabs. You can find detailed information on this functions in the section [[om:rs:schedule_menu|Scheduler Tabs]]. ===== Zoom ===== You can increase and decrease the resolution of the timeline or timeplan with the functions ''Zoom In'' and ''Zoom Out''. Select a part of the timeline with the mouse and choose ''Zoom into Selection'' to increase the resolution of a defined part. Possible options are: * Zoom In (Shift+PageDown) * Zoom Out (Shift+PageUp) * Zoom into Selection ===== Center Current Time ===== **Shortcut:** (Ctrl+N) The view swaps to the current date and time. ===== Follow Current Time ===== **Shortcut:** (Ctrl+F) The view follows the current time if this function is active. ===== View ===== With this options, you can choose a mode for the view of the scheduled events. The time can be displayed horizontal and the outputs vertical or vice versa. Moreover, the scheduled events can be listed as text. Possible Options are: * Show Timeline (Ctrl+F10) * Show Timeplan (Ctrl+F11) * Show Text View (Ctrl+F12) ===== Sub Channels ===== Show Sub Channels, Hide Sub Channels Displays or hides the sub-channels of stereo channels and channel groups. ===== Show Time Grid ===== **Shortcut:** (Ctrl+G) Shows or hides a grid. The displayed distance between the lines is always the same, but the relation to the time depends on the zoom factor.