<- sx2:central_module|Central Module ^ sx2:start|SX2 Configuration ^ sx2:connecting|Connecting modules to the Core -> ======Fader modules====== The 52-5620 is the fader module of the SX2. It always contains a 10" TFT display that is separated into variable functional areas. There can be up to 2 fader modules, so a total of 16 faders is possible. {{:sx2:sx2-fader-section.png?900|}} **1.** Key section\\ These keys can be freely configured in their funtionality, color and behaviour. See [[sx2:console|SX2 Configuration - Console]]. Once you have chosen which functions you assigned to the keys, you can label them using the delivered stickers. ---- **2.** Fader section\\ Use the fader to control the audio level from -∞ to 0 dB with an additional gain of +10 dB. ---- **3.** Key and Encoder section\\ The encoder always serves as gain encoder. If analog gain is available for the selected input, press the encoder once to toggle between ''DGain'' and ''AGain'' settings.\\ The keys can be freely configured in their funtionality, color and behaviour. See [[sx2:console|SX2 Configuration - Console]]. Key and Encoder function and status are mirrored and labeled within the TFT display (5). ---- **4.** Channel Name and On/Off status.\\ ---- **5.** Counterpart to area 3\\ In this area, key and encoder function are labeled and mirrored. Can also be used to control the assigned functionality via touch input. ---- **6.** Fader view area\\ Depending on the configured Fader view, this section can vary. See [[sx2:console|SX2 Configuration - Console]]. ---- **7.** Overbridge central area\\ Can show various views. See [[sx2:console|SX2 Configuration - Console]].