<- tb5:monitor_functions|Monitor Functions - Monitoring Options ^ tb5:start|Toolbox5 Software ^ tb5:synchronisation|Synchronisation 52/RM4200D & 52/XR -> ====== Input Pools ====== On the ''Input Pools'' tab, you can create and label ''Input Pools''. Input Pools are used to be able to use several sources on faders. For the signal switching, you should use the functions ''Input Select'' and ''ACCESS Input Select''. Under ''/Fader Channels'' you can assign the sources to the input pools. (See also [[tb5:fader_channels|Fader Channels – Configuring Signal Sources]]) In the ''Input Pools'' area, all created input pools are shown. As a default, a pool named ''Pool 1'' is already available. To create a new input pool, click add. You can create up to 15 input pools. To delete an input pool, select an input pool from the list and click ''Remove''. In the ''Edit Pool'' area, in the Label box, you can enter a name for the selected input pool. The name may be up to 7 characters long. It is shown in the display of the control modules if Input Select or ''ACCESS Input Select'' is enabled in a fader strip. **Note**\\ To be as flexible as possible when assigning to the fader during operation, you should configure only one input pool.