<- tb5:snapshot_options|Snapshot Options ^ tb5:start|Toolbox5 Software ^ tb5:fixed_inserts|Fixed Inserts -> ====== Timers ====== Select the ''Timers'' tab to set the options for the available timers in the system. You can use timers to show or set periods of times in which faders are open, to control other functions. (see [[tb5:logic#mixer_functions|Timer Running and Timer Reset]] for information) In the ''Timers'' area, all available timers are listed. You can neither add nor remove existing timers. Also, you can not change the sequence of the timers in the list. You can use a maximum of six timers per mixer. The timers in the list have a fixed serial number ''Nr'' and a ''Label''. You can not change the numbers. Select a timer from the ''Timers'' list. In the ''Edit Timer'' area, enter a name for this timer in the ''Label'' box. This name may be up to 16 digits long. You can see the name ''Timers'' list in the ''User Label'' column. [{{ timers.zoom60.png?nolink |//Timers, establishing links between the timers logic functions and the logic sources.//}}] For each timer, you can select a logic source for Start, Stop and Reset. For this, you can use any logic source, for example the keys of a control module. Select a timer from the ''Timers'' list. In the ''Edit Timer'' area, select a logic from the list. Click ''Select'' next to the ''Source'' box. The ''Logic Sources'' window opens. Select a logic source and click ''Assign''. Alternatively you can also double-click on the Logic source or use drag & drop.