<- tb5:tft_views|TFT Views - Overview ^ tb5:start|Toolbox5 Software ^ tb5:tft_view_design|Design - Creating TFT Views -> ====== Fader Views and Master Views ====== For fader views and master views, you can use the same type of TFT display and operating elements (the timer function is the only one that is only applicable in a master view). Only the possible arrangement of the elements differs a bit. A master view can be created as required using the whole area of the TFT display. For configuring a fader view, you can use the same height, but only a quarter of the width of a TFT display. This is because 4 fader modules correspond with the image width of a TFT display, therefore 4 fader views are shown next to each other. [{{ master-view-example.zoom80.png?nolink |//Master View, example: central display with clock and timer.//}}] [{{ fader-view-example.jpg?nolink |//Fader View, example: EQ//}}] In the ''Available Views'' list, all created fader views and master views are shown. Select a view from this list to edit it, or create a new view to configure it afterwards. To create a view, click ''Add''. A submenu opens, in which you can select whether to create a fader view or a master view. Click ''Remove'' to delete a selected view from the list. These functions are also available by right-clicking in the list. In this contextual menu, you also find the command ''Make default for channels of pool'', after which you find a list of all available pools of the currently selected mixing device. If you assign a view as default to a fader channel, it is always shown if no other fader view is selected.