<- tb8:snapshot_logics|Snapshot Logics ^ tb8:start|Toolbox8 Software ^ tb8:combined_logics|Combined Logics -> ====== Channel Parameter Defaults ====== You can set default parameters for channels on the ''Channel Parameters Defaults'' tab. [{{ :tb8:mixer_-_channel_parameter_defaults.png?nolink |//Channel Parameter Defaults tab//}}] These parameters are loaded, if you * load channel snapshots (Default parameters are loaded just for those functions which are not saved in the channel snapshot) * load mixer snapshot (Default parameters are loaded just for those functions which are not saved in the mixer snapshot) * reset a channel (Default parameters are loaded for all function on this channel) * save a configuration with new channel snapshot defaults into the device In the ''Parameter objects'' area, you can see a list of all available functions to which you can set a default parameter. If no default parameters are set, firmware defaults are set and you can see ''(not provided, using device defaults)'' in the ''Default Settings'' column. Select a function from the ''Parameter objects'' list to edit its parameters in the ''Edit Parameters'' area. Depending on the selected function, you can see typical parameters in the ''Edit Parameters'' area. Click ''Reset to firmware default'' to clear the parameters for this function, and set them to firmware default.