<- tb9:channel_parameter_defaults|Channel Parameter Defaults ^ tb9:start|Toolbox9 Software ^ tb9:console_illumination|Console Illumination -> ====== Combined Logics ====== Combined Logics are simple and flexible assignable Logics for monitoring state of assigned channels. They are mostly used for Red light assignment. Combined Logics are always "OR"-Logics triggered by fader starts of assigned channels. There are 4 combined logics available. On the ''Combined Logics'' tab in the ''/'', you can edit only the ''label'' of the Combined Logics. [{{ tb9_combinedlogics.png?nolink&1000 |//Combined Logics tab - renaming combined logics//}}] [{{ tb9_faderchannel_combilogics.png?300|//Fader Channel - Fader Logic tab; Combined Logic Default Assignment// }}]To assign a default Combined Logic to a fader channel, follow these steps: - Go to ''//Fader Channels'' - Select the channel which you want to assign - Go to ''Fader Logic'' tab on the right hand side - In the ''Combined Logic Default Assignment'' section, select the Combined Logic you want to assign. You can also change combined logic assignment without changing Toolbox configuration: * On a Physical Console: Go to ''//Console'' * For each channel strip: select a key on a fader module. Use the DSP On/Off function ''Combined Logic''. Select the Combined Logic to be assigned (1...4) for this key in the key configuration. * On Access: Select a key on a central module. Select Key function ''Combined Logic'' in channel functions. Select the Combined Logic to be assigned (1...4) for this key in the key configuration. Make sure, the key acts ''with Access''. * On a TFT: Go to ''/TFT Views'' * For each Channel Strip: Create a Fader view. Create a Button with the DSP On/Off function ''Combined Logic''. Select the Combined Logic to be assigned (1...4) for this Button in the key configuration. * On Access: Create a Master View. Select Key function ''Combined Logic'' in channel functions. Select the Combined Logic to be assigned (1...4) for this key in the key configuration. Make sure, the key acts ''with Access''. Reset a combined logic: On a central Module or TFT, use the key function ''Reset Combined Logic''. Select the Combined Logic to be assigned (1...4) for this key in the key configuration. ===== Example ===== On changing studio configurations, a red light has to be assigned flexible. Combined Logics can be assigned or deassigned with a channel key and without changing configuration in Toolbox. If you set one or more channels on, the red light turns on. If you set all assigned channels off, red light turns off. Four Combined Logics allow you to have multiple red lights. Also you can assign other functions to multiple Combined Logics.