<- tb9:selector_source_lists|Selector Source Lists ^ tb9:start|Toolbox9 Software ^ tb9:synchronisation|Synchronisation -> ====== Input Pools ====== On the ''Input Pools'' tab, you can create and label ''Input Pools''. [{{ tb9_inputpools.png?1000&nolink |//Audio - Input Pools//}}] Input Pools are used to be able to use several sources on faders. For the signal switching, you should use the functions ''Input Select'' and ''ACCESS Input Select''. Under ''/Fader Channels'' you can assign the sources to the input pools. (See also [[tb9:fader_channels|Fader Channels]]) In the ''Input Pools'' area, all created input pools are shown. As a default, a pool named ''Pool 1'' is already available. To create a new input pool, click add. You can create up to 15 input pools. To delete an input pool, select an input pool from the list and click ''Remove''. In the ''Edit Pool'' area, in the Label box, you can enter a name for the selected input pool. You can edit processing of the faders in the input pool on the [[tb9:channel_assignment|Channel Assignment]] Page. **Note**\\ To be as flexible as possible when assigning to the fader during operation, you should configure only one input pool.