<- tb9:automix|Automix ^ tb9:start|Toolbox9 Software ^ tb9:operation_mode|Operation Mode -> ====== PGM Routing Rules ====== On the ''PGM Routing Rules'' tab, you can create rules for routing signals to program busses. For each fader channel you can select a list of bus routings which are denied. For creating a rule and assigning it to a fader channel follow these steps: - In the ''PGM Routing Rules'' area, click ''Add''. You can see a new rule with a blank name in the ''PGM Routing Rules'' list. - In the ''Edit PGM Routing Rule'' area, enter a name for this rule in the ''Rule Name'' box. - Select the program bus check boxes (e.g., ''PGM1'', ''PGM2'', …, ''PGM48'') to define which program buses are denied in this rule. Now, the rule is created. - In the project tree, select the ''Fader Channels'' subsection of the desired virtual mixer and select the ''Advanced'' tab. - Select a fader channel from the ''Defined Channels'' list. - In the ''PGM Routing'' area on the ''Advanced'' tab, select a rule in the ''Select Rule'' box. This PGM routing rule is now assigned to the selected fader channel. You can create a maximum of 20 program routing rules. [{{ tb9_pgm_routingrules.png?1000&nolink |//PGM Routing Rules, creating program rules.//}}]