<- tb9:clock_logics|Clock Logics ^ tb9:start|Toolbox9 Software ^ tb9:potentiometer_control|Potentiometer Control -> ====== Selector Logics ====== Selector logics become active, if a defined source of a selector is chosen. To configurate selector logics, in the project tree, select ''/Logic/Selector Logics''. [{{ tb9_selectorlogic.png?1000&nolink |//Selector Logic, linking Selectors to audio sources.//}}] In the ''Selector Logics'' list all available selector logics are shown. To create a selector logic, you need to create a selector. (See [[tb9:selectors|Selectors]]) Click ''Add'' to create a new selector logic. Click ''Remove'' to delete a selected selector logic. Both options are also available by right-clicking to the list. In the Edit Selector Logic area you can configure a selected entry: - In the ''Label'' box, enter an appropriate name for the selector logic. This label may be up to 16 digits long. - In the ''Selector'' list, choose the selector you want to assign. - Click Select, next to the ''Left Source Condition'' box. The ''Audio Sources'' window opens. - In the ''Audio Sources'' window, select the audio source which should activate the selector logic. - Click ''Assign'' to assign the audio source to the ''Left Source Condition''. Alternatively, you can double-click on the desired audio source or drag it to the ''Left Source Condition'' box. - Repeat step 3 to 5 for the right audio source'' Right Source Condition''. The created'' Selector Logics ''are available as a logic source in the'' Logic Sources ''window. [{{ tb9_logicsource.png?250&nolink |//Logic Sources, Selector Logics//}}]