======Connecting modules to the 52/XS I/O Core======

The control module and I/O boxes have to be connected to the APC ports of the 52/XS2 I/O Core 52-1830. It is important to connect the peripheral modules to the correct APC port. 

<WRAP center round important 80%>
**Important**\\  Use always shielded CAT5 or CAT6 ethernet cables (at least S/UTP, F/UTP or SF/UTP) to connect these modules to the XS core.
</WRAP>

{{ :sx:1830_rear.png?nolink |//52-1830 rear view//}}

In the following table you can find the assignment of the control module, I/O boxes and DeviceLinks to the APC ports. 

^Name of the APC port^52-1830^
|APC 1|52-1156 - 52/TX control module|
|APC 2|I/O box / DeviceLink|
|APC 3|I/O box / DeviceLink|
|APC 4|I/O box / DeviceLink|

You can always change this sequence at the [[tb8:hardware|Hardware page]].
==== 52/TX Bundle information document ====
[[https://dhd.audio/dhd-downloads/produkte/52-1996C/52-1996c_information.pdf|52/TX Bundle information provides dimensions and cabling information in one PDF document]]