Hardware

On the Hardware page you can set which 52/DX modules are connected to your system.

DXConfig Software - Hardware

In the Field Device name, enter a distinctive device name for this 52/DX mixing console.

Select Type:

• Select your DX Type.

Select your core type. (52-1830: 52/XS Core with integrated Multi I/O)

• Use MADI Module 52-7321: If your XS core is equipped with a MADI module 52-7321, please select this check box to enable the inputs and outputs for the I/O Settings tab.
• Use Gigabit Audio 52-7391: If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the I/O Settings tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.
• Use Dante module 52-7080: If your 52/XS core is equipped with a 52-7080 internal Dante module.

• APC 4 Select an I/O type or set the value to (none). Default is (None).
• APC 3 Select an I/O type or set the value to (none). Default is (None).
• APC 2 Select an I/O type or set the value to (none). Default is (none).

Shows, how your configurated DX will look like.