Connecting modules to the XS Core
The control module and I/O boxes have to be connected to the APC ports of the 52/XS Core 52-1804. It is important to connect the peripheral modules to the correct APC port.
Important
Use always shielded CAT5 or CAT6 ethernet cables (at least S/UTP, F/UTP or SF/UTP) to connect these modules to the XS core.
In the following table you can find the assignment of the control module, I/O boxes and DeviceLinks to the APC ports.
| Name of the APC port | 52-1804 |
| APC 1 | 52-1114 (52-1104) 52/DX control module |
| APC 2 | I/O box 3 / DeviceLink 3 |
| APC 3 | I/O box 2 / DeviceLink 2 |
| APC 4 | I/O box 1 / DeviceLink 1 |
Example 4 Fader 52/DX and 1 Multi I/O box
Important
Use minimum Firmware version 07-04-19 and DXConfig version 7-4-8-0 or the version on the CD supplied with the console, which may be a later version.
Cabling Example: 52/DX Bundle 52-1991D