Table of Contents
Running Stereo Tool on DHD XD3 Cores
Important
Terms and conditions of Thimeo Audio Technology B.V. apply. DHD audio is not responsible for the functionality provided by Stereo Tool. For support requests regarding Stereo Tool, please contact Thimeo Audio Technology B.V.
Important
Stereo Tool requires a special license to run on DHD Devices. Standard Stereo Tool licenses will not work!
Note
Stereo Tool only runs in 52-7554 XD3 Cores with Quad Core CPU.
Enabling/Disabling/Restarting Stereo Tool in Web Apps
To enable or disable Stereo Tool in Web Apps:
- log in as a user with sufficient rights
- go to
System App>Service>Manage Apps and User Rights - Click the
Stereo Tooltoggle switch - disabling and re-enabling it will restart the Stereo Tool app on the device
Once the Stereo Tool is enabled, you can reach its GUI via the Web Apps landing page:
Setup User Rights
To manage basic access to Stereo Tool:
- log in as a user with sufficient rights
- go to
System App>Service>Manage Apps and User Rights - In the
Manage User Rightssection, selet the user group you want to manage - Select / Deselect the
Stereo Tool Access via Web Appscheck box - Click Save
- To enable Stereo Tool Access for anyone without login, enable
Stereo Tool Access via Web Appscheckbox within theAnyoneuser group. This will also disable the checkbox within any other user group.
Obtaining a Stereo Tool License
Stereo Tool comes with each XD3 Core with quad core CPU as a demo version that will add some random audio distortion.
To obtain a valid Stereo Tool license, visit https://www.thimeo.com/stereo-tool-for-dhd/ to buy it directly from Thimeo Audio Technology. After your purchase:
- Go To Web Apps and open Stereo Tool
- Within the Stereo Tool web interface, click on the Settings Icon in the upper right corner and select
License - Enter your license key
- The license will be stored on the device's internal memory
Toolbox Configuration
Stereo Tool is treated like any audio source and sink within the DHD Core.
Route Audio to and from Stereo Tool
In order to get access to the related audio sinks and sources you need to switch the XD3 Core type to 52-7554.
Afterwards you have access to the dedicated Audio I/Os for Stereo Tool in the I/O Overview.
Use classic routing or Selectors in order to get audio in/from the Stereo Tool.
Audio Flow and Latency
Stereo Tool introduces, depending on the selected processing latency as well as the selected processing, a significant amount of audio latency. Just as any other external On Air processor does. We recommend to use it only as a bus processor.