Combined Logics

Combined Logics are simple and flexible assignable Logics for monitoring state of assigned channels. They are mostly used for Red light assignment. Combined Logics are always “OR”-Logics triggered by fader starts of assigned channels. There are 4 combined logics available.

On the Combined Logics tab in the <device>/<mixer>, you can edit only the label of the Combined Logics.

Combined Logics tab - renaming combined logics
Fader Channel - Fader Logic tab; Combined Logic Default Assignment

To assign a default Combined Logic to a fader channel, follow these steps:

  1. Go to <device>/<mixer>/Fader Channels
  2. Select the channel which you want to assign
  3. Go to Fader Logic tab on the right hand side
  4. In the Combined Logic Default Assignment section, sellect the Combined Logic you want to assign.

You can also change combined logic assignment without changing TB8 Configuration:

Reset a combined logic: On a central Module or TFT, use the key function Reset Combined Logic. Select the Combined Logic to be assigned (1…4) for this key in the key configuration.

Example

On changing studio configurations, a red light has to be assigned flexible. Combined Logics can be assigned or deassigned with a channel key and without changing configuration in TB8.

If you set one or more channels on, the red light turns on. If you set all assigned channels off, red light turns off.

Four Combined Logics allow you to have multiple red lights. Also you can assign other functions to multiple Combined Logics.