Selector Logics

Selector logics become active, if a defined source of a selector is chosen. To configurate selector logics, in the project tree, select <Device>/Logic/Selector Logics.

Selector Logic, linking Selectors to audio sources.

In the Selector Logics list all available selector logics are shown.

To create a selector logic, you need to create a selector. (See Selectors)

Click Add to create a new selector logic. Click Remove to delete a selected selector logic. Both options are also available by right-clicking to the list.

In the Edit Selector Logic area you can configure a selected entry:

1. In the Label box, enter an appropriate name for the selector logic. This label may be up to 16 digits long.
2. In the Selector list, choose the selector you want to assign.
3. Click Select, next to the Left Source Condition box. The Audio Sources window opens.
4. In the Audio Sources window, select the audio source which should activate the selector logic.
5. Click Assign to assign the audio source to the Left Source Condition. Alternatively, you can double-click on the desired audio source or drag it to the Left Source Condition box.
6. Repeat step 3 to 5 for the right audio source Right Source Condition.

The created Selector Logics are available as a logic source in the Logic Sources window.

Logic Sources, Selector Logics