Functional Range of the XC2/XD2/XS2 Core Devices with Firmware 9

Note
All values are maximum values, availability depends on number and type of used features. Please ask DHD support for more information.

feature 52/XD2 Cores 52/XC2 Cores 52/XS2 Cores
52-7440A / 52-7440B / 52-7441A / 52-7442A / 52-7442B
with 52-7456 XD2 controller
52-7420 52-7423 /
52-7424 with 52-1950 license
52-7423 /
52-7410 /
52-7424 with 52-1950 license
52-7424 52-1830 52-1810
4x DSP Module 52-7460 3x DSP Module 52-7460 2x DSP Module 52-7460 1x DSP Module 52-7460 1 additional DSP Module 52-7460 no additional DSP module 1 additional DSP Module 52-7460 (requires 52-8584 and 52-8585 license) Gold upgrade (requires 52-8584 and 52-8585 license) Silver upgrade (requires 52-8585 license) basic system Standard SX2Config Gold upgrade (requires 52-8584, 52-8585 and 52-1950 license) Silver upgrade (requires 52-8585 and 52-1950 license) 52-1830 with 52-1950 license Standard SX2Config 52-1810 with 52-1950 license
fader processing (1) 64 64 48 24 44 24 44 24 20 16 16 24 20 16 16 16
fader layers (1) 4 4 4 4 2 2 2 4 2 2 2 2
fader channels 250 250 150 250 150 150 150 predefined 150 150 150 predefined 150
output functions / low priority output functions (13) 120 / SW Option:(2)240 120 / SW Option:(2)240 120 / SW Option:(2)240 120 / SW Option:(2)240 80 40 predefined 120 / SW Option:(2)240 80 40 predefined 40
super output functions 18 18 18 18 18 SW option(2):
18
0 18 18 SW option(2):
18
0 SW option(2):
18
logic functions 200
with SW option(2): 300
200
with SW option(2): 300
200
with SW option(2): 300
200
with SW option(2): 300
80 40 predefined 200
with SW option(2): 300
80 40 predefined 40
summing busses (stereo) (PGM+Aux+CF(3)+PFL) 48 40 32 40 32 24 16 11
(predefined: 2x PGM, 2x Aux, 6x CF, 1x PFL)
32 24 16 11
(predefined: 2x PGM, 2x Aux, 6x CF, 1x PFL)
16
mix minus busses (stereo) (within the limit of max. number of summing busses) 30 24 16 24 16 12 6 6 16 12 6 6 6
PFL busses (stereo) (within the limit of max. number of summing busses) 4x 2
(2 for each virtual mixer)
4x 2
(2 for each virtual mixer)
4x 2
(2 for each virtual mixer)
4x 2
(2 for each virtual mixer)
2x 2
(2 for each virtual mixer)
1 1 4x 2
(2 for each virtual mixer)
2x 2
(2 for each virtual mixer)
1 1 1
(virtual) mixer DSP core 4 4 4 4 2 1 1 4 2 1 1 1
summing bus format 5.1 and 5.1 downmix SW option(2) SW option(2) SW option(2) not available SW option(2) not available SW option(2)
summing bus signal types: Voice and Music SW option(2) SW option(2) SW option(2) not available SW option(2) not available SW option(2)
delay(4) SW option(2):
delay functions of 1 sec or 10 sec available for fader and fix processing
SW option(2):
delay functions of 1 sec or 10 sec available for fader and fix processing
SW option(2):
delay functions of 1 sec or 10 sec available for fader and fix processing
SW option(2): 1 sec. / fader SW option(2):
48 delay functions of 1 sec or 10 sec available for fader and fix processing, a total of max. 170 seconds, a total of max. 48 stereo channels
SW option(2): 1 sec. / fader SW option(2): 48 delay functions of 1 sec or 10 sec available for fader and fix processing, a total of max. 170 seconds, a total of max. 48 stereo channels
max. 680 seconds, max. 192 stereo channels max. 510 seconds, max. 144 stereo channels max. 340 seconds, max. 96 stereo channels max. 170 seconds, max. 48 stereo channels max. 340 seconds, max. 96 stereo channels max. 170 seconds, max. 48 stereo channels max. 340 seconds, max. 96 stereo channels max. 170 seconds, max. 48 stereo channels max. 170 seconds, max. 48 stereo channels max. 170 seconds, max. 48 stereo channels
profanity delay SW option(2) SW option(2) SW option(2) no SW option(2) no SW option(2)
virtual keys 100 100 100 100 40 5 0 100 40 5 0 5
clock logics yes yes yes yes 0 0 0 yes 0 0 0 0
selector logics yes yes yes yes 10 0 0 yes 10 0 0 0
level detects 48 48 20 48 20 10 5 5 predefined 20 10 5 5 predefined 5
Loudness Meter (EBU R128) (within the limit of max. number of level detects) SW option(2):
20
SW option(2):
15
SW option(2):
10
SW option(2):
5
SW option(2):
10
SW option(2):
5
SW option(2):
10
SW option(2):
5
0 SW option(2):
5
SW option(2):
5
SW option(2):
5
0 SW option(2):
5
logic delay 20 20 20 20 10 5 0 20 10 5 0 5
Potentiometer Controls 30 30 0 30 30 30 0 30
Automix yes yes SW option(2):
1 Automix Group
yes yes yes SW option(2):
1 Automix Group
yes
processing the talkback matrix yes SW option(5) SW option(5) SW option(5) SW option(5) SW option(5) no no SW option(5) SW option(5) no no no
member of talkback matrix yes SW option(5) SW option(5) SW option(5)
global resources yes SW option(5) SW option(5) SW option(5)
global logics (global logic exchange with DHD devices) yes SW option(5) SW option(5) SW option(5)
networking (direct logic exchange with DHD devices) yes SW option(5) SW option(5) SW option(5)
serial ports 2 (each: RS232 or RS422) 1 (RS232) 1 (RS232) 1 (RS232)
Gigabit Audio / MADI SFP cages SFP cages only for Gigabit Audio:
52-7440: 12
52-7441: 8
52-7442: 4
SFP cages only for MADI (HW option(6)):
52-7456: 2
HW option(9):
52-7423: 4
52-7424 with 52-1950 license: 4
52-7410: 2
HW option(10):
2
HW option(9):
2
HW option(9):
2
HW option(9):
2
HW option(10):
2
HW option(9):
2
Connection of Concentrator (52-7310, 52-7320) to GA SFP cages yes yes no yes yes yes no yes
GA Device interlink (multi-channel audio connection with XC/XD/XS cores via GA port), 512/512 ch, bidirectional HW option(8) HW option(8) HW option(8) HW option(8)
APC ports 8 12 8 4 8
APC Device interlink (multi-channel audio connection with XC/XD/XS cores via APC port), 48/48 ch, bidirectional SW option(7) SW option(7) SW option(7) SW option(7)
redundant Dante ports for 64/64ch. AoIP connections HW option(14) HW option(11) HW option(11) HW option(11)
AES67 extension module for 64/64ch. AoIP connections HW option(17) HW option(16) HW option(16) HW option(16)
Dante 4/4ch AoIP connection via ETH1 port no yes yes yes
usage of 52/MX or 52/RX or RX2 control modules (15) yes yes no yes yes yes no yes
usage of SX2 control modules yes yes yes yes yes yes yes yes
usage of 52/SX control modules (15) yes yes no yes yes yes no yes
usage of 52/DX control module (15) yes yes no yes yes yes no yes
usage of 52/TX control module (15) yes yes no yes yes yes no yes
usage of 52-8511 views app yes yes no yes yes yes no yes
Maximum configurable number of different central TFT displays 20 20 predefined 20 20 20 predefined 20
customisable views yes yes no,
selection of predefined views
yes yes yes no,
selection of predefined views
yes
Toolbox configuration capability yes yes no yes yes yes no yes
sync input BNC: Wordclock, AES11, PAL, NTSC, HD Tri-Level
HW option(6)(8): MADI, GA
SW option(7): APC
BNC: Wordclock, AES11, PAL, NTSC, HD Tri-Level
Ethernet: Dante
HW option(6)(8)(11)(16): MADI, GA, Dante, AES67
SW option(7): APC
BNC: Wordclock, AES11
Ethernet: Dante
HW option(6)(8)(11)(16): MADI, GA, Dante, AES67
SW option(7): APC

Note
All values are maximum values, availability depends on number and type of used features. Please ask DHD support for more information.


(1) The assignment of fader processing to layers works in the following way:
Examples:
Up to 24 “DSP” faders, 4 layers, with 52-7423 / 52-1830 (Gold and Silver Upgrade), 52-7420 XC2 core
24 “physical” Faders (no layers)
12 “physical” Faders, 2 Layers each
8 “physical” Faders, 3 Layers each
6 “physical” Faders, 4 Layers each
Up to 44 “DSP” faders, 4 layers, with 52-7420 XC2 core and additional DSP card (52-7460)
44 “physical” Faders (no layers)
22 “physical” Faders, 2 Layers each
14 “physical” Faders, 3 Layers each
11 “physical” Faders, 4 Layers each
Up to 64 “DSP” faders, 4 layers, with 52-744x XD core, and at least 3 DSP cards (52-7460)
64 “physical” Faders (no layers)
32 “physical” Faders, 2 Layers each
21 “physical” Faders, 3 Layers each
16 “physical” Faders, 4 Layers each
(2)additional license required: 52-8581 - Enhanced DSP Processing
(3)CF: Clean Feed, mix minus bus, n-1 bus
(4)Internal DSP processing is always stereo. Therefore the maximum number of mono delays is equal to the maximum number of stereo channels. The right channel is unused in case of mono processing.
(5)additional license required: 52-8583 - XC/XS Core Control Networking
(6)MADI SFP module (52-7321 or 52-7325) required for each SFP cage
(7)additional license required: 52-8582 - XC/XD/XS Core Audio Network
(8)XC Gigabit Audio port (SFP modules 52-7391 or 52-7395) required
(9)GA/MADI SFP cages on XC2 Cores and XS2 Cores (with 52-1950 license) can be used with:
- 52-7321/52-7325 MADI SFP modules (include DHD license code) or
- 52-7391/52-7395 XC Gigabit Audio port (include DHD license code) for Core-to-Core connections or
- to connect Concentrators / MADI Concentrators with their included SFP modules (no DHD license code)
(10)GA/MADI SFP cage of the cores 52-1810, 52-1830, 52-7424 can be used with:
- 1x 52-7321/52-7325 MADI SFP modules (include DHD license code) and/or
- 1x 52-7391/52-7395 XC Gigabit Audio port (include DHD license code) for Core-to-Core connections for using 2x MADI or 2x GA Core-to-Core-Connection or Concentrators, a 52-1950 license is required.
(11)XC2 Dante IP Audio Interface (52-7080) required for the extension slot
(13)Each high priority Output Function can be replaced by two low priority Output Functions.
(14)XC2 Concentrator (52-7310) and XC2 Dante IP Audio Interface (52-7080) required for the expansion slot
(15)Only MX, RX, SX, DX and TX modules supporting Firmware 9 can be used with a core running Firmware 9 - for system upgrades, check with your local DHD distributor for module compatibility
(16)XC2 AES67 RAVENNA Interface (52-7067) required for the extension slot
(17)XC2 Concentrator (52-7310) and XC2 AES67 RAVENNA Interface (52-7067) required for the extension slot