Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
network:general [2017/06/28 13:20]
127.0.0.1 external edit
network:general [2021/02/02 14:31] (current)
Line 1: Line 1:
-<- network:hardware|Recommended Network Switches ​^ network:​start|Network Specifications ^ network:​protocols|Protocols & Ports used ->+<- network:guidelines|Guidelines for DHD Networks ​^ network:​start|Network Specifications ^ network:​protocols|Protocols & Ports used -> 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
 + 
  
  
Line 17: Line 30:
 ====== General Settings ====== ====== General Settings ======
  
-The Ethernet port of a DHD device complies to the standard 100Base-TXIEEE 802.3u. This means that the network connected to it must run at least with a speed of 100 Mbit/s. Never try to connect a DHD device to a network running on 10 Mbit/s! Even if it looks like this might work, in fact it will not!+The Ethernet port of a DHD device complies to the standard 100Base-TX IEEE 802.3u ​(52/XC, 52/XD, 52/XS) and 1000BASE-T (52/XC2, 52/XD2, 52/XS2) 
 + 
 +<WRAP center round alert 80%> 
 +**Warning**\\  ​Never try to connect a DHD device to a network running on 10 Mbit/​s! ​\\ Even if it looks like this might work, in fact it will not! 
 +</​WRAP>​
  
-The Ethernet interface of a DHD device operates with the following speed:+/* The Ethernet interface of a DHD device operates with the following speed:
  
->100 Mbps - Half Duplex+>100 Mbps - Half Duplex ​*/
  
-If you connect other network equipment to a DHD device, please ensure it is able to handle these specifications. However, if you experience connection problems, make sure the requirements are met. This is particularly important if you connect a PC directly to a DHD device using a crossover Ethernet cable. If you do this, make sure you have set the properties of the network adapter to the right values. ​Most network adapters have an "​Auto-Detect"​ option ​- please use it!+If you connect other network equipment to a DHD device, please ensure it is able to handle these specifications. However, if you experience connection problems, make sure the requirements are met. This is particularly important if you connect a PC directly to a DHD device using a crossover Ethernet cable. If you do this, make sure you have set the properties of the network adapter to the right values. ​Use "​Auto-Detect"​ option, that are provided by the most network adapters.
  
 <WRAP center round important 80%> <WRAP center round important 80%>
 **Important**\\ ​ You can operate several DHD devices as well as one or several server PCs within the same network segment. **Important**\\ ​ You can operate several DHD devices as well as one or several server PCs within the same network segment.
  
-However, you should always use **Unmanaged ​Switches** for networking. **Never** use hubs! Switches provide much better data throughput, because they eliminate collisions between network packets.+However, you should always use **Switches** for networking. **Never** use hubs! Switches provide much better data throughput, because they eliminate collisions between network packets.
 </​WRAP>​ </​WRAP>​
  
 We recommend using switches that automatically adjust their port speed to the speed of the node connected to a particular port. Also, make sure all devices on a shared network can exchange data on the ports and protocols described in the next section. We recommend using switches that automatically adjust their port speed to the speed of the node connected to a particular port. Also, make sure all devices on a shared network can exchange data on the ports and protocols described in the next section.