Differences

This shows you the differences between two versions of the page.

--- sx:central_module [2016/11/29 15:38]
go
+++ sx:central_module [2020/06/04 10:41]
@@ Line 1: / Line 1: @@
-<- sx:fader_modules|Fader Modules ^ sx:start|52/SX Configuration ^ sx:tft_module|TFT Display ->
-======Central module======
-The central module 52-1010/52-1011 is the main control module of a 52/SX mixing console.
-In the following table, you can find features and pre-configured push button functions of the 52-1010/52-1011 central module.
-{{:sx:52-1010_front_highlight.zoom65.png?nolink |}}
-**1.** Pre-listening and talkback speaker with built-in amp \\ No additional audio cable is required for this central module. The audio signals will be transported together with control signals and PoE through one CAT5 cable, which is connected to the APC port on the XS Core.
-----
-**2.** Encoder section for control of EQs, dynamics and other settings\\ To change parameters of a selected channel, press the'' Input'', ''EQ'', ''Dynamic'' or ''Aux'' key to switch between the TFT pages.\\ The 52-1010 has four coloured encoders. Use them to control parameters for EQ, dynamics, Aux etc. on the TFT/Touch display. You can see a coloured frame around the parameters on the TFT display, this colour shows, which encoder controls which parameter.\\ To recall default values for the whole mixing console, press the ''Load Default'' key one second. In that case, snapshot 0, which is the default mixer snapshot, is loaded.\\ Press the ''Snapshot'' key to show the ''Snapshot'' view on the TFT. There, you can save up to 20 different mixer snapshots. If a channel is selected, the ''Snapshots'' view shows the available channel snapshots. There, you can save up to 50 different channel snapshots.
-----
-**3.** Flexible encoder & OLED display section for additional volume and monitor selectors, studio support. (see [[sx:console|52/SX Configuration - Console]])
-----
-**4.** GP  - General Purpose keys\\ You can use these keys to switch GPOs  and get status signalisation from a GPI, or any other available logic source. You can also use these keys to switch the function of one of the encoders next to the OLED-Display. (see [[sx:console|52/SX Configuration - Console]])
-----
-**5.** Talkback microphone with built-in preamp \\ The 52-1010 is the first Series 52 control module with built-in talkback microphone. No additional audio cable is required for this central module. The audio signals will be transported together with control signals and PoE through one CAT5 cable, which is connected to the APC port on the XS Core.
-----
-**6.** Professional high-grade volume potentiometers
-----
-**7.** Monitor selector, expanded by touch-display selector (see [[sx:console|52/SX Configuration - Console]])
-----
-**8.** Talkback keys\\ It is possible to configure these keys for a simple talkback, for example to a sound booth or an additional 52/SX mixing console. (see [[sx:console|52/SX Configuration - Console]])