Differences
This shows you the differences between two versions of the page.
sx:connecting [2017/11/16 15:23] 127.0.0.1 external edit |
sx:connecting [2020/06/04 10:41] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | <- sx:tft_module|TFT Display ^ sx:start|52/SX Configuration ^ sx:general|General information on Configuration -> | ||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | |||
- | ======Connecting modules to the 52/XS Core====== | ||
- | |||
- | The control modules and I/O boxes have to be connected to the APC ports of the 52/XS Cores 52-18xx. It is important to connect the peripheral modules to the correct APC port. | ||
- | |||
- | <WRAP center round important 80%> | ||
- | **Important**\\ Use always shielded CAT5 or CAT6 ethernet cables (at least S/UTP, F/UTP or SF/UTP) to connect these modules to the XS core. | ||
- | </WRAP> | ||
- | |||
- | [{{ :sx:1810_rear.png?nolink |//Rear view of 52-1810//}}] | ||
- | [{{ :sx:1830_rear.png?nolink |//Rear view of 52-1830//}}] | ||
- | |||
- | In the following table you can find the assignment of the control modules, I/O boxes, DeviceLinks and TFT/Touch displays to the APC ports. | ||
- | |||
- | ^Name of the APC port^52-1810^52-1830^ | ||
- | |APC 1|TFT/touch display (52-4018)((APC port 1 can be used as port for I/O box or DeviceLink if PC TFT View Software is used instead of TFT module.))|TFT/touch display (52-4018)((APC port 1 can be used as port for I/O box or DeviceLink if PC TFT View Software is used instead of TFT module.))| | ||
- | |APC 2|central control modul\\ (52-1010, 52-1011)|central control module\\ (52-1010, 52-1011)| | ||
- | |APC 3|fader module 1\\ (52-1020, 52-1021, 52-1024, 52-1025)|fader module 1\\ (52-1020, 52-1021, 52-1024, 52-1025)| | ||
- | |APC 4|fader module 2\\ (52-1020, 52-1021, 52-1024, 52-1025)|I/O box 1 / DeviceLink 1| | ||
- | |APC 5|fader module 3\\ (52-1020, 52-1021, 52-1024, 52-1025)|n. a.| | ||
- | |APC 6|fader module 4\\ (52-1020, 52-1021, 52-1024, 52-1025) / I/O box 3 / DeviceLink 3 ((The APC port 6 is useable either for a fader module, an I/O box or an DeviceLink. Because of this, for example a 12 fader mixing console with three I/O boxes or a 16 fader mixing console with two I/O boxes are the maximum configurations for a 52/SX.))|n. a.| | ||
- | |APC 7|I/O box 2 / DeviceLink 2|n. a.| | ||
- | |APC 8|I/O box 1 / DeviceLink 1|n. a.| | ||
- | |||
- | |||
- | |||
- | |||
- | <WRAP center round download 80%> | ||
- | **Weblink**\\ You find a PDF file with cabling examples in the [[http://dhdaudio.de/index.php?option=com_content&task=view&id=1097&Itemid=555|52/SX Download]] area on [[http://www.dhd-audio.com]]. | ||
- | </WRAP> | ||
- | <WRAP center round info 80%> | ||
- | **Note**\\ Make sure, that **52-1335** is selected at APC 8 and APC 7 at the Hardware page of the SXconfig software. | ||
- | </WRAP> | ||
- | |||
- | |||
- | |||
- | |||
- | ===== Example 12 Fader and 2 52/XS Multi-I/O Boxes ===== | ||
- | <WRAP center round important 80%> | ||
- | **Important**\\ Use minimum **Firmware version 08-01-00** and **SXConfig version 8-1-0-0** or the version on the CD supplied with the console, which may be a later version. | ||
- | </WRAP> | ||
- | |||
- | [{{ :sx:52sx_cabling_12fader_2multi-io_6.png |//Cabling Example: 12 Fader and 2 52/XS Multi-I/O Boxes//}}] | ||
- | |||
- | ===== Example 4 Fader and 1 52/XS2 I/O core ===== | ||
- | <WRAP center round important 80%> | ||
- | **Important**\\ Use minimum **Firmware version 08-01-00** and **SXConfig version 8-1-0-0** or the version on the CD supplied with the console, which may be a later version. | ||
- | </WRAP> | ||
- | |||
- | [{{ :sx:52sx_cabling_4fader_1xs2-io-core_1.png |//Cabling Example: 4 Fader and 1 52/XS2 I/O Core//}}] | ||
- | |||
- | |||