Differences
This shows you the differences between two versions of the page.
sx:hardware [2016/11/29 16:46] go [for 52-1830 DSP I/O cores] |
sx:hardware [2021/02/02 14:31] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | <- sx:general|General information on Configuration ^ sx:start|52/SX Configuration ^ sx:system_settings|System Settings -> | ||
- | |||
- | |||
- | |||
- | |||
- | ======Hardware====== | ||
- | |||
- | [{{ :sx:hardware.png?nolink |//SXConfig Software - Hardware//}}] | ||
- | |||
- | On the ''Hardware'' page you can set which 52/SX modules are connected to your system. | ||
- | |||
- | |||
- | ===== Common Settings Area ===== | ||
- | |||
- | In the ''Device name'' box, enter a distinctive device name for this 52/SX mixing console. | ||
- | |||
- | |||
- | ===== SX Fader Module ===== | ||
- | |||
- | ''Select Type'': | ||
- | * In the left drop-down menu, select 52-1021 or 52-1025 depending on your fader modules. | ||
- | * In the right drop-down menu, select the number of faders. | ||
- | |||
- | ===== XS Core ===== | ||
- | |||
- | Select your core type. (''52-1810'': Standard 52/XS2 Core; ''52-1830'': 52/XS2 Core with integrated Multi I/O) | ||
- | |||
- | * ''Use MADI Module 52-7321'': If your XS core is equipped with a MADI module 52-7321, please select this check box to enable the inputs and outputs for the ''I/O Settings'' tab. | ||
- | * ''Use Gigabit Audio 52-7391'': If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the ''I/O Settings'' tab. Gigabit Audio is useful e.g. to interlink with other DHD devices. | ||
- | * ''Use Dante module 52-7080'': If your 52/XS core is equipped with a 52-7080 internal Dante module. | ||
- | |||
- | |||
- | |||
- | ===== XS I/O connections ===== | ||
- | When you check ''Use 52-8511 PC TFT View Software'', you can additionally assign a hardware module to ''APC 1''. This is possible because you do not need an 52-4018 TFT module. | ||
- | |||
- | <WRAP center round important 80%> | ||
- | **Important**\\ 52-8511 PC TFT View Software requires valid License! | ||
- | </WRAP> | ||
- | <WRAP center round tip 80%> | ||
- | **Tip**\\ When using older I/O Modules, they are not displayed by default. Go to ''Options''>''Configuration'' and select the ''Product Filter''-Tab. | ||
- | |||
- | Activate {{:wiki:rot.png?nolink}} ''show discontinued products''. All Module types are now visible. | ||
- | </WRAP> | ||
- | ==== for 52-1810 DSP cores ==== | ||
- | |||
- | * ''APC 8'' |Select an I/O type or set the value to ''(none)''. Default is ''52-1335''. | ||
- | * ''APC 7'' |Select an I/O type or set the value to ''(none)''. Default is ''52-1335''. | ||
- | * ''APC 6'' |Select an I/O type or set the value to ''(none)''. Default is ''(none)''. | ||
- | |||
- | ==== for 52-1830 DSP I/O cores ==== | ||
- | |||
- | * ''APC 4'' |Select an I/O type or set the value to ''(none)''. Default is ''(none)'' | ||
- | ===== Console Preview ===== | ||
- | |||
- | ''Split'': Shows a split version of the control modules in the preview. | ||
- | ''Flat'': Shows the control modules build in a flat table installation frame instead of a console frame. |