Differences

This shows you the differences between two versions of the page.

--- sx:monitoring [2016/05/30 12:00]
marc [Talkback]
+++ sx:monitoring [2016/08/04 09:19]
127.0.0.1 external edit
@@ Line 1: / Line 1: @@
+<- sx:console|Console ^ sx:start|52/SX Configuration ^ sx:buses|Buses ->
+<- sx:console|Console ^ sx:start|52/SX Configuration
+ ^ sx:buses|Buses  ->
+<- sx:console|Console ^ sx:start|52/SX Configuration
+ ^ sx:buses|Buses  ->
 ====== Monitoring & Talkback ======
@@ Line 47: / Line 52: @@
 In the ''Talkback 1/2'' columns, in the ''Source'' boxes, you can insert an audio source which is activated by the logic sources inserted in the ''Condition'' boxes.
-To assign an audio source, as talkback into a monitoring signal, click the [...] button, next to the ''Source'' box. The ''Audio Sources'' window opens. Select a audio source from the list and click assign.
+To assign an audio source, as talkback into a monitoring signal, click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Source'' box. The ''Audio Sources'' window opens. Select a audio source from the list and click assign.
-To assign an logic source as talkback condition, click the [...] button, next to the ''Condition'' box. The ''Logic Sources'' window opens. Select a logic source from the list and click assign.
+To assign an logic source as talkback condition, click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Condition'' box. The ''Logic Sources'' window opens. Select a logic source from the list and click assign.
 You can dim the monitor speaker signals, if a talk condition becomes true. To do this, select the corresponding ''DIM MON1/2 SPK'' check box.