Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sx:on_air_switch [2016/08/04 09:26]
marc
sx:on_air_switch [2021/02/02 14:31] (current)
Line 1: Line 1:
 <- sx:​buses|Buses ^ sx:​start|52/​SX Configuration ^ sx:​users|Users -> <- sx:​buses|Buses ^ sx:​start|52/​SX Configuration ^ sx:​users|Users ->
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 ======On-Air Switch====== ======On-Air Switch======
  
Line 23: Line 51:
  
   - On the TFT/Touch Display, on the main page, tap on ''​add. Settings''​.   - On the TFT/Touch Display, on the main page, tap on ''​add. Settings''​.
-  - Tap on the ''​ON AIR''​ button and press at the same time the ''​OK''​ key on the central module (52-1010). The ''​ON AIR''​ button turns red.''​ Source 3''​ is now selected. +  - Tap on the ''​ON AIR''​ button and press at the same time the ''​OK''​ key on the central module (52-1011). The ''​ON AIR''​ button turns red.''​ Source 3''​ is now selected. 
-  - To switch back to ''​Source 1''​ (or ''​Source 2''​),​ tap on the ''​OFF AIR''​ button and press at the same time the ''​OK''​ key on the central module (52-1010). The ''​OFF AIR''​ button turns green and the ''​ON AIR''​ button turns white.''​ Source 1''​ is now selected.+  - To switch back to ''​Source 1''​ (or ''​Source 2''​),​ tap on the ''​OFF AIR''​ button and press at the same time the ''​OK''​ key on the central module (52-1011). The ''​OFF AIR''​ button turns green and the ''​ON AIR''​ button turns white.''​ Source 1''​ is now selected.
  
 In the ''​On Air Switch Signal''​ area, you can assign the On Air Switch Signal to the''​ Selector List 1''​ and ''​Selector List 2''​. You can find these lists on the ''​Selector''​ view of the TFT/Touch Display. In the ''​On Air Switch Signal''​ area, you can assign the On Air Switch Signal to the''​ Selector List 1''​ and ''​Selector List 2''​. You can find these lists on the ''​Selector''​ view of the TFT/Touch Display.
  
 The Label and color for the corresponding TFT buttons can be changed in the ''​TFT Keyoptions''​ area. The Label and color for the corresponding TFT buttons can be changed in the ''​TFT Keyoptions''​ area.