Differences
This shows you the differences between two versions of the page.
|
sx:v7:buses [2016/06/09 16:25] 127.0.0.1 external edit |
sx:v7:buses [2019/03/11 15:49] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | <- sx:v7:monitoring|Monitoring & Talkback ^ sx:v7:start|SXConfig ^ sx:v7:on_air_switch|On-Air-Switch -> | ||
| - | ======Buses====== | ||
| - | On the ''Buses'' page you can configure the settings for all buses that are available in the 52/SX system. | ||
| - | |||
| - | [{{ :sx:sx_buses.png?nolink |SXConfig Software - Buses}}] | ||
| - | |||
| - | In the following tables all options on this page are explained. | ||
| - | |||
| - | | **element** | **description** | | ||
| - | |Talk 1 Source|Click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Talk 1 Source'' box. The ''Audio Sources'' window opens. Select a audio source from the list and click assign.\\ When the ''Talk 1 Condition'' logic becomes true, the ''Talk 1 Source'' is active on the corresponding bus.| | ||
| - | |Talk 2 Source|Click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Talk 2 Source'' box. The ''Audio Sources'' window opens. Select a audio source from the list and click assign.\\ When the ''Talk 2 Condition'' logic becomes true, the ''Talk 2 Source'' is active on the corresponding bus.| | ||
| - | |Talk Attenuation|When a Talk Source is active, the busses can be attenuated between ''0 dB'' and ''Off'' in steps of 1 dB. Use the ''Talk Attenuation'' selector to change the attenuation value.| | ||
| - | |||
| - | | **column** | **description** | | ||
| - | |Bus name|Here you can find the name of the bus for which you configure the following settings.| | ||
| - | |Stereo|Select this check box, if the bus is stereo. Clear the check box to configure the bus as mono.| | ||
| - | |Talk 1 Condition|Click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Talk 1 Condition'' box. The ''Logic Sources'' window opens. Select a logic source from the list and click assign.\\ When this logic source becomes true, the ''Talk 1 Source'' is active on the corresponding bus.| | ||
| - | |Talk 2 Condition|Click the {{:sx:on-air_switch_dots.png?nolink}} button, next to the ''Talk 2 Condition'' box. The ''Logic Sources'' window opens. Select a logic source from the list and click assign.\\ When this logic source becomes true, the ''Talk 2 Source'' is active on the corresponding bus.| | ||
| - | |Limiter|Select the ''On'' check box to activate the limiter for this bus. \\ Select a threshold value from the drop-down menu (-30 dB to 20 dB).| | ||
| - | |CF Source|Select from the drop down menu an audio source for your clean feed signal| | ||
| - | |Use Output select|Select this check box to enable source selection for the alternative clean feed signal.| | ||
| - | |Add to Selector List 1|Select this check box to add a bus to source list 1. This bus will be available in the monitor source list, which is assigned to the ''Selector'' key on 52-1010 central module.| | ||
| - | |Add to Selector List 2|Select this check box to add a bus to source list 2. This bus will be available for monitoring in the'' Monitor 2 ''list, which is available in the ''Selector'' view of the TFT/Touch Display.| | ||