Differences

This shows you the differences between two versions of the page.

--- sx:v7:hardware [2016/06/09 16:25]
127.0.0.1 external edit
+++ sx:v7:hardware [2016/11/29 17:53]
go [XS Core]
@@ Line 1: / Line 1: @@
-<- sx:v7:general|General information on Configuration  ^ sx:v7:start|SXConfig ^ sx:v7:system_settings|System Settings  ->
+<- sx:v7:general|General information on Configuration  ^ sx:v7:start|52/SX Configuration ^ sx:v7:system_settings|System Settings  ->
 ======Hardware======
-[{{ :sx:hardware.png?nolink |//SXConfig Software - Hardware//}}]
+[{{ :sx:v7:hardware.png?nolink |//SXConfig Software - Hardware//}}]
 On the ''Hardware'' page you can set which 52/SX modules are connected to your system.
@@ Line 20: / Line 25: @@
 ===== XS Core =====
-Select your core type. (''52-1810'': Standard 52/XS Core; ''52-1830'': 52/XS Core with integrated Multi I/O)
+Select your core type. Select 52-1804 if you want to configure a 4 fader mixer or select 52-1801 for 8-16 fader.
-  * ''Use MADI Module 52-7321'': If your XS core is equipped with a MADI module 52-7321, please select this check box to enable the inputs and outputs for the ''I/O Settings'' tab.
+  * ''Use MADI Module 52-1821'': If your XS core is equipped with a MADI module 52-1821, please select this check box to enable the inputs and outputs for the ''I/O Settings'' tab.
   * ''Use Gigabit Audio 52-7391'': If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the ''I/O Settings'' tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.
-  * ''Use Dante module 52-7080'': If your 52/XS core is equipped with a 52-7080 internal Dante module.
-<WRAP center round tip 80%>
-**Tip**\\  When using an older Core (52-1801 or 52-1804), they are not displayed by default. Go to ''Options''>''Configuration'' and select the ''Product Filter''-Tab.
-Activate {{:wiki:rot.png?nolink}} ''show discontinued products''. All Module types are now visible.
-</WRAP>
 ===== XS I/O connections =====