Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
sx:v7:hardware [2016/10/28 15:16]
127.0.0.1 external edit
sx:v7:hardware [2021/02/02 14:31] (current)
Line 1: Line 1:
 <- sx:​v7:​general|General information on Configuration ​ ^ sx:​v7:​start|52/​SX Configuration ^ sx:​v7:​system_settings|System Settings ​ -> <- sx:​v7:​general|General information on Configuration ​ ^ sx:​v7:​start|52/​SX Configuration ^ sx:​v7:​system_settings|System Settings ​ ->
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
  
  
Line 25: Line 48:
 ===== XS Core ===== ===== XS Core =====
  
-Select your core type. (''​52-1810'':​ Standard 52/XS Core; ''​52-1830'':​ 52/XS Core with integrated Multi I/O)+Select your core type. Select ​52-1804 if you want to configure a 4 fader mixer or select ​52-1801 for 8-16 fader.
  
-  * ''​Use MADI Module 52-7321'':​ If your XS core is equipped with a MADI module 52-7321, please select this check box to enable the inputs and outputs for the ''​I/​O Settings''​ tab.+  * ''​Use MADI Module 52-1821'':​ If your XS core is equipped with a MADI module 52-1821, please select this check box to enable the inputs and outputs for the ''​I/​O Settings''​ tab.
   * ''​Use Gigabit Audio 52-7391'':​ If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the ''​I/​O Settings''​ tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.   * ''​Use Gigabit Audio 52-7391'':​ If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the ''​I/​O Settings''​ tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.
-  * ''​Use Dante module 52-7080'':​ If your 52/XS core is equipped with a 52-7080 internal Dante module. 
  
-<WRAP center round tip 80%> 
-**Tip**\\ ​ When using an older Core (52-1801 or 52-1804), they are not displayed by default. Go to ''​Options''>''​Configuration''​ and select the ''​Product Filter''​-Tab. ​ 
  
-Activate {{:​wiki:​rot.png?​nolink}} ''​show discontinued products''​. All Module types are now visible. 
-</​WRAP>​ 
  
 ===== XS I/O connections ===== ===== XS I/O connections =====
  
  
-  * ''​APC 8''​ (or APC 4 when using 52-1830 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1335''​. +  * ''​APC 8''​ (not available ​when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1330''​. 
-  * ''​APC 7''​ (not available when using 52-1830 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1335''​. +  * ''​APC 7''​ (not available when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1330''​. 
-  * ''​APC 6''​ (not available when using 52-1830 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ (none)''​. +  * ''​APC 6''​ (not available when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ (none)''​.
- +
-When you check ''​Use 52-8511 PC TFT View Software'',​ you can additionally assign a hardware module to ''​APC 1''​. This is possible because you do not need an 52-4018 TFT module. +
- +
-<WRAP center round important 80%> +
-**Important**\\ ​ 52-8511 PC TFT View Software requires valid License! +
-</​WRAP>​ +
 ===== Console Preview ===== ===== Console Preview =====
  
 ''​Split'':​ Shows a split version of the control modules in the preview. ''​Split'':​ Shows a split version of the control modules in the preview.
 ''​Flat'':​ Shows the control modules build in a flat table installation frame instead of a console frame. ''​Flat'':​ Shows the control modules build in a flat table installation frame instead of a console frame.