Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sx:v7:hardware [2019/03/11 15:49]
sx:v7:hardware [2020/06/04 10:41] (current)
Line 1: Line 1:
 +<- sx:​v7:​general|General information on Configuration ​ ^ sx:​v7:​start|52/​SX Configuration ^ sx:​v7:​system_settings|System Settings ​ ->
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +======Hardware======
 +
 +[{{ :​sx:​v7:​hardware.png?​nolink |//SXConfig Software - Hardware//​}}]
 +
 +On the ''​Hardware''​ page you can set which 52/SX modules are connected to your system. ​
 +
 +
 +===== Common Settings Area =====
 +
 +In the Field ''​Device name'',​ enter a distinctive device name for this 52/SX mixing console.
 +
 +
 +===== SX Fader Module =====
 +
 +''​Select Type'': ​
 +    * In the left drop-down menu, select 52-1020 or 52-1024 depending on your fader modules.
 +    * In the right drop-down menu, select the number of faders.
 +
 +===== XS Core =====
 +
 +Select your core type. Select 52-1804 if you want to configure a 4 fader mixer or select 52-1801 for 8-16 fader.
 +
 +  * ''​Use MADI Module 52-1821'':​ If your XS core is equipped with a MADI module 52-1821, please select this check box to enable the inputs and outputs for the ''​I/​O Settings''​ tab.
 +  * ''​Use Gigabit Audio 52-7391'':​ If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the ''​I/​O Settings''​ tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.
 +
 +
 +
 +===== XS I/O connections =====
 +
 +
 +  * ''​APC 8''​ (not available when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1330''​.
 +  * ''​APC 7''​ (not available when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ 52-1330''​.
 +  * ''​APC 6''​ (not available when using 52-1804 XS Core)|Select an I/O type or set the value to''​ (none)''​. Default is''​ (none)''​.
 +===== Console Preview =====
 +
 +''​Split'':​ Shows a split version of the control modules in the preview.
 +''​Flat'':​ Shows the control modules build in a flat table installation frame instead of a console frame.