Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sx:v7:system_settings [2019/03/11 15:49]
sx:v7:system_settings [2020/06/04 10:41] (current)
Line 1: Line 1:
 +<- sx:​v7:​hardware|Hardware ​ ^ sx:​v7:​start|52/​SX Configuration ^ sx:​v7:​io_settings|I/​O Settings ​ ->
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +======System Settings======
 +
 +On the ''​System Settings''​ page, you can configure general options for your 52/SX.
 +
 +[{{ :​sx:​v7:​system_settings.png?​nolink |//SXConfig Software - System Settings//​}}]
 +
 +In the following sections you can find the descriptions for these options.
 +
 +===== Synchronisation =====
 +
 +Select here, which sample rate should be set for internal synchronisation (44.1 kHz / 48 kHz). 
 +
 +Select in the ''​Select Source''​ list, which sync source should be used:
 +
 +  * Internal - internal clock
 +  * BNC Wordclock (rising edge) (optional)
 +  * BNC Wordclock (falling edge) (optional)
 +  * BNC AES/EBU (optional)
 +  * GA1 (Gigabit Audio) (optional)
 +  * MADI1 (optional)
 +
 +===== Fader Program Key Mode =====
 +
 +In this area you can change the behaviour of the Fader Program Keys.
 +
 +  * ''​PGM On/​Off'':​ If you press the Program 1 or Program 2 key on the fader module the channel is activated or deactivated on the corresponding Program bus.
 +  * ''​PGM1 Off Air'':​ If the Program 1 key is deactivated,​ the channel is routed to OffAir bus.
 +
 +===== TFT State Indicators =====
 +
 +You can change text, behaviour and look of the TFT state indicators. ​
 +
 +In the Table
 +  * ''​Element'':​ All four available status transparents are shown in this list.
 +  * ''​Text'':​ Double-click on the text to change it.
 +  * ''​Color'':​ Double-click on the color field to change it. A Dropdown menu opens.
 +  * ''​Condition'':​ Double-click on the logic condition, the Logic sources window opens. Select the desired logic and click assign.
 +
 +The ''​Logic Condition''​ under the Table allows you to select the logic condition. When you have selected a list entry in the table, click ''​Select''​. The logic source window opens. Select the desired logic and click assign.
 +
 +<WRAP center round info 80%>
 +**Note**\\ ​ Logic conditions are DHD internal functions. A logic source can be true (1) or false (0). Logic sources can be GPIs, Keys/TFT Buttons, Level or Correlation Detects or system state functions. For more information on Logic see [[tb8:​logic|Toolbox 8 Documentation:​ General information on Logic]].
 +</​WRAP>​
 +
 +<WRAP center round important 80%>
 +**Important**\\ ​ If more special logic sources are required or you need to work with logics (logic functions), enhanced feature license and Toolbox 8 is required.
 +
 +Ember+ as an additional logic source is also possible. Contact your DHD dealer or DHD directly for further information on upgrading your system.
 +</​WRAP>​
 +
 +===== Peakmeter Option =====
 +
 +You can change behaviour of the PPMs.
 +
 +  * ''​Scale Color'':​ Select the colour of the peak program meter on the TFT display. The selected colour is used for all peak program meters of the 52/SX.
 +  * ''​Scale Type'':​ Select your preferred type of peak meter scale.
 +  * ''​Red Bar Over (dB)'':​ Select the decibel value at which the level bar turns red for signaling a critical level area. (-20 dB to +20 dB)
 +  * ''​Zero Offset (dB)'':​ Select the decibel value, which will be added to the level bar to adjust the shown signal level.
 +
 +===== Licensing =====
 +
 +You can use additional Licenses for more advanced features. ​
 +
 +  * ''​Use 52-8583 XC/XS Core Control Networking'':​ To enable the features of the XC/XS Core Control Networking license select this check box.\\ \\ <WRAP center important 80%>​**Important**\\ The configuration can only be loaded into the device, if the corresponding license key is assigned to this device.</​WRAP>​
 +  *''​ Send Logic Control Information'':​ Enables the Device to exchange logic information with other cores that have this license and are in the same project. (16 Devices maximum possible)
 +  * ''​Use 52-8582 XC/XD/XS Core Audio Network'':​ To enable the features of the XC/XS Core Audio Network license select this check box.\\ \\ <WRAP center important 80%>​**Important**\\ The configuration can only be loaded into the device, if the corresponding license key is assigned to this device.</​WRAP>​
 +  * ''​Use 52-8581 Enhanced DSP Processing'':​ To enable the features of the Enhanced DSP Processing license select this check box.\\ \\ <WRAP center important 80%>​**Important**\\ The configuration can only be loaded into the device, if the corresponding license key is assigned to this device.</​WRAP>​
 +
 +
 +<WRAP center round info 80%>
 +**Note**\\ ​ For general Information on licensing see [[licensing:​start|Licensing]].
 +</​WRAP>​
 +<WRAP center round info 80%>
 +**Note**\\ ​ When you have a valid license code, you have to enter it directly into your core. After this done, you have to allow the license here for the configuration software.
 +
 +See [[tb5:​maintenance_window#​enter_license|Maintenance / Enter License]] for information on entering a license into your core.
 +</​WRAP>​