Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sx:v7:xs_core [2019/03/11 15:49]
sx:v7:xs_core [2020/06/04 10:41] (current)
Line 1: Line 1:
 +<- sx:​v7:​start|SX Configuration Manual ^ sx:​v7:​start|52/​SX Configuration ^ sx:​v7:​fader_modules|Fader Modules ​ ->
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +======XS Core - DSP unit======
 +
 +The powerful 52/XS Core is an independent DSP system which does not require a PC for operation. There are no fans, hard discs or batteries inside the 52/XS Core and in the I/O boxes, allowing silent and low-maintenance operation directly in the studio.
 +
 +High-performance 40-bit floating-point digital signal processing for:
 +
 +  * 3-band fully parametric equalizers, subsonic filter, dynamics, limiter, delay for all 16 fader channels, mono or stereo
 +  * 32 summing busses (mono), Aux busses, clean feeds and PFL
 +  * 6 clean feeds (mix-minus, mono or stereo)
 +  * 4 monitoring busses for control room and studio support
 +  * flexible talkback, logic and GPIO system
 +  * integrated routing matrix
 +  * internal tone generator
 +  * Gigabit audio network for 512 input and 512 output channels for low-latency interconnection between 52/XS cores or to other DHD products
 +  * internal or external 48 kHz or 44.1 kHz sync
 +
 +Other features of the XS Core:
 +
 +  * highly efficient external wide-range power supply, Energy Star Level V, redundancy option
 +  * minimal system power consumption
 +  * expandable modular system allows optional integration of other DHD product lines
 +  * serial or TCP/IP interface options to radio automation or other external control systems
 +
 +<WRAP center round tip 80%>
 +**Tip**\\ ​ For more information on the Core Types, see [[http://​dhd-audio.de/​dhd_files/​52sx/​manual/​html/​52sx_modules_en/​index.html|Module List]].
 +</​WRAP>​
 +
 +===== XS Cores =====
 +
 +In the following table the main differences between the 52-1801 and the 52-1804 are listed.
 +
 +|**Feature**|{{:​wiki:​rot.png?​nolink|}}**52-1801**|{{:​wiki:​rot.png?​nolink|}}**52-1804**|
 +|support for redundant power supply|yes|yes|
 +|number of supported faders|12/​16*|8|
 +|number of supported I/O boxes|2/​3%%**%%|1|
 +|number of audio, power & control ports (APC)|8|4|
 +|serial interface for external control|yes|yes|
 +|TCP/IP interface for external control|yes|yes|
 +
 +* 16 fader (4 fader modules) are only possible if a maximum of two I/O boxes are used on the 52-1801.
 +
 +%%**%% Three I/O boxes are only possible if a maximum of 12 fader (3 fader modules) are used on the 52-1801.