Connecting modules to the 52/XS I/O Core
The control module and I/O boxes have to be connected to the APC ports of the 52/XS2 I/O Core 52-1830. It is important to connect the peripheral modules to the correct APC port.
Important
Use always shielded CAT5 or CAT6 ethernet cables (at least S/UTP, F/UTP or SF/UTP) to connect these modules to the XS core.
In the following table you can find the assignment of the control module, I/O boxes and DeviceLinks to the APC ports.
| Name of the APC port | 52-1830 |
|---|---|
| APC 1 | 52-1156 - 52/TX control module |
| APC 2 | I/O box / DeviceLink |
| APC 3 | I/O box / DeviceLink |
| APC 4 | I/O box / DeviceLink |
You can always change this sequence at the Hardware page.