Functional Range of the XC3/XD3/XS3 Core Devices with Firmware 10.2
Note
All values are maximum values, availability depends on number and type of used features. Please ask DHD support for more information.
| feature | XD3 Cores | XC3 Cores | XS3 Cores | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 52-7540A XD3 12k Router with 52-7550A/B XD3 Controller & IP Core 1 DSP included | 52-7550A/B XD3 Controller & IP Core 1 DSP included | 52-7520 | 52-7523 | 52-7500 | ||||||||||||||
| 4 add. DSP Modules 52-7530 | 3 add. DSP Modules 52-7530 | 2 add. DSP Modules 52-7530 | 1 add. DSP Module 52-7530 | no additional DSP module | 1 additional DSP Module 52-7530 | no additional DSP module | 1 additional DSP Module 52-7530 (requires 52-8584 and 52-8585 license) | with Gold upgrade (52-8584) and with Silver Upgrade (52-8585) licenses | with Silver upgrade (52-8585) license | basic system | with Gold upgrade (52-8584), with Silver Upgrade (52-8585) and 52-1950 licenses | with Silver upgrade (52-8585) and 52-1950 licenses | with 52-1950 license | Standard Config | ||||
| fader processing (1) (stereo) | 96 | 96 | 64 | 48 | 24 | 24 | 48 | 24 | 48 | 24 | 24 | 20 | 24 | 24 | 20 | 20 | ||
| fader layers (1) | 4 | 4 | 4 | 4 | 2 | 2 | 4 | 2 | 2 | 2 | ||||||||
| fader channels | 250 | 250 | 250 | 250 | 150 | 150 | 250 | 150 | 150 | predefined | ||||||||
| output functions / low priority output functions (12) | 120 / SW Option:(2)240 | 120 / SW Option:(2)240 | 120 / SW Option:(2)240 | 120 / SW Option:(2)240 | 80 | 40 | 120 / SW Option:(2)240 | 80 | 40 | predefined | ||||||||
| super output functions | 18 | 18 | 18 | 18 | 18 | SW option(2): 18 | 18 | 18 | SW option(2): 18 | 0 | ||||||||
| logic functions | 200 with SW option(2): 300 | 200 with SW option(2): 300 | 200 with SW option(2): 300 | 200 with SW option(2): 300 | 80 | 40 | 200 with SW option(2): 300 | 80 | 40 | predefined | ||||||||
| summing busses (stereo) (PGM+Aux+CF/N-1(3)+PFL) | 126 | 126 | 96 | 72 | 48 | 48 | 72 | 48 | 72 | 48 | 24 | 16 | 48 | 24 | 16 | 11 (predefined: 2x PGM, 2x Aux, 6x CF, 1x PFL) |
||
| clean feed / mix minus / N-1 busses (stereo) (within the limit of max. number of summing busses) | 96 | 96 | 64 | 48 | 24 | 24 | 48 | 24 | 48 | 24 | 12 | 6 | 24 | 12 | 6 | 6 | ||
| PFL busses (stereo) (within the limit of max. number of summing busses) | 4x 2 (2 for each virtual mixer) | 4x 2 (2 for each virtual mixer) | 4x 2 (2 for each virtual mixer) | 4x 2 (2 for each virtual mixer) | 2x 2 (2 for each virtual mixer) | 1 | 4x 2 (2 for each virtual mixer) | 2x 2 (2 for each virtual mixer) | 1 | 1 | ||||||||
| (virtual) mixer DSP core | 4 | 4 | 4 | 4 | 2 | 1 | 4 | 2 | 1 | 1 | ||||||||
| summing bus format 5.1 and 5.1 downmix | SW option(2) | SW option(2) | SW option(2) | SW option(2) | not available | |||||||||||||
| summing bus signal types: Voice and Music | SW option(2) | SW option(2) | SW option(2) | SW option(2) | not available | |||||||||||||
| delay(4) | SW option(2): delay functions of 1 sec or 10 sec available for fader and fix processing | SW option(2): delay functions of 1 sec or 10 sec available for fader and fix processing | SW option(2): delay functions of 1 sec or 10 sec available for fader and fix processing | SW option(2): 32 delay functions of 1 sec or 10 sec available for fader and fix processing, a total of max. 320 seconds, a total of max. 32 stereo channels | SW option(2): 1 sec. / fader |
|||||||||||||
| max. 1600 seconds, max. 160 stereo channels | max. 1280 seconds, max. 128 stereo channels | max. 960 seconds, max. 96 stereo channels | max. 640 seconds, max. 64 stereo channels | max. 320 seconds, max. 32 stereo channels | max. 320 seconds, max. 32 stereo channels | max. 640 seconds, max. 64 stereo channels | max. 320 seconds, max. 32 stereo channels | max. 640 seconds, max. 64 stereo channels | max. 320 seconds, max. 32 stereo channels | max. 320 seconds, max. 32 stereo channels | max. 320 seconds, max. 32 stereo channels | |||||||
| profanity delay | SW option(2) 1 per core with up to 100 sec. delay time | SW option(2) 1 per core with up to 100 sec. delay time | SW option(2) 1 per core with up to 100 sec. delay time | SW option(2) 1 per core with up to 100 sec. delay time | no | |||||||||||||
| virtual keys | 100 | 100 | 100 | 100 | 40 | 5 | 100 | 40 | 5 | 0 | ||||||||
| clock logics | yes | yes | yes | yes | 0 | 0 | yes | 0 | 0 | 0 | ||||||||
| selector logics | yes | yes | yes | yes | 10 | 0 | yes | 10 | 0 | 0 | ||||||||
| level detects | 96 | 48 | 48 | 48 | 48 | 48 | 10 | 5 | 48 | 10 | 5 | 5 predefined | ||||||
| Loudness Meter (EBU R128) (within the limit of max. number of level detects) | SW option(2): 25 | SW option(2): 20 | SW option(2): 15 | SW option(2): 10 | SW option(2): 5 | SW option(2): 5 | SW option(2): 10 | SW option(2): 5 | SW option(2): 10 | SW option(2): 5 | SW option(2): 5 | SW option(2): 5 | SW option(2): 5 | 0 | ||||
| logic delay | 20 | 20 | 20 | 20 | 10 | 5 | 20 | 10 | 5 | 0 | ||||||||
| Potentiometer Controls | 30 | 30 | 30 | 30 | 30 | 0 | ||||||||||||
| Automix | yes | yes | yes | yes | yes | SW option(2): 1 Automix Group |
||||||||||||
| processing the talkback matrix (maximum number of participants) | yes (40 / SW option(2) 64) | SW option(5) (40 / SW option(2) 48) | SW option(5) (40 / SW option(2) 48) | SW option(5) (40 / SW option(2) 48) | SW option(5) (40 / SW option(2) 48) | SW option(5) (40 / SW option(2) 48) | no | SW option(5) (40 / SW option(2) 48) | SW option(5) (40 / SW option(2) 48) | no | no | |||||||
| member of talkback matrix | yes | SW option(5) | SW option(5) | |||||||||||||||
| global resources | yes | SW option(5) | SW option(5) | |||||||||||||||
| global logics (global logic exchange with DHD devices) | yes | SW option(5) | SW option(5) | |||||||||||||||
| networking (direct logic exchange with DHD devices) | yes | SW option(5) | SW option(5) | |||||||||||||||
| serial ports (RS232) | HW option(14) | HW option(15) | HW option(15) | |||||||||||||||
| SFP cages for Gigabit Audio and/or MADI | HW option(9): 24 | HW option(9): 20 | HW option(9): 16 | HW option(9): 12 | HW option(9): 8 | HW option(9): 4 | HW option(9): 52-7523: 4 52-7524 with 52-1950 license: 4 | MADI only, HW option(19): 1 |
||||||||||
| Connection of XC3 Concentrator (52-7510) to GA SFP cages | yes | yes | no | |||||||||||||||
| Connection of XC2 Concentrator (52-7310) to GA SFP cages | yes | yes | no | |||||||||||||||
| Connection of MADI Concentrator (52-7320) to GA SFP cages | yes | yes | no | |||||||||||||||
| GA Device interlink (multi-channel audio connection with XC/XD/XS cores via GA port), 512/512 ch, bidirectional | HW option(8) | HW option(8) | no | |||||||||||||||
| APC ports | 4 | 12 | 8 | |||||||||||||||
| APC Device interlink (multi-channel audio connection with XC/XD/XS cores via APC port), 48/48 ch, bidirectional | SW option(7) | SW option(7) | SW option(7) | |||||||||||||||
| IPx extension slots for AoIP modules (Dante or AES67/Ravenna) | HW option(11): 2 | HW option(11): 1 | HW option(18): 1 |
|||||||||||||||
| 16ch x 16ch AES67 Ravenna on IPx1 | no | SW option(16) | SW option(16) | |||||||||||||||
| 16ch x 16ch USB audio interface | no | no | yes | |||||||||||||||
| 4ch x 4ch Dante Ultimo interface | no | no | yes | |||||||||||||||
| usage of 52/MX or 52/RX or RX2 control modules (13) | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of SX2 control modules | yes | yes | yes | |||||||||||||||
| usage of DX2 control modules | yes | yes | yes | |||||||||||||||
| usage of TX2 control modules | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of 52/SX control modules (13) | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of 52/DX control module (13) | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of 52/TX control module (13) | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of 52-8511 Views app | yes | yes | yes | yes | yes | no | ||||||||||||
| usage of 52-8512 Assist app | yes | yes | yes | |||||||||||||||
| usage of Fader Backpress functionality on SX2 modules | yes | yes | yes | yes | yes | no | ||||||||||||
| Maximum configurable number of different central TFT displays | 20 | 20 | 20 | 20 | 20 | predefined | ||||||||||||
| customisable views | yes | yes | yes | yes | yes | no, selection of predefined views |
||||||||||||
| Toolbox configuration capability | yes | yes | yes | yes | yes | no | ||||||||||||
| Full redundant operation with doubled core hardware | yes | no | no | |||||||||||||||
| sync input | internal clock generator BNC: Wordclock, AES11, PAL, NTSC, HD Tri-Level HW option(6)(8)(11): MADI, GA, Dante, AES67 SW option(7): APC | internal clock generator BNC: Wordclock, AES11, PAL, NTSC, HD Tri-Level HW option(6)(8)(11): MADI, GA, Dante, AES67 SW option(7): APC | internal clock generator HW option(6)(17)(18): Wordclock, AES11, MADI, Dante, AES67 SW option(7): APC |
|||||||||||||||
Note
All values are maximum values, availability depends on number and type of used features. Please ask DHD support for more information.
| (1) | The assignment of fader processing to layers works in the following way: Examples: |
||
| Up to 24 “DSP” faders, 4 layers, with 52-7523 (Gold and Silver Upgrade), 52-7520 XC3 core 24 “physical” Faders (no layers) 12 “physical” Faders, 2 Layers each 8 “physical” Faders, 3 Layers each 6 “physical” Faders, 4 Layers each | Up to 48 “DSP” faders, 4 layers, with 52-7520 XC3 core and additional DSP card (52-7530) 48 “physical” Faders (no layers) 24 “physical” Faders, 2 Layers each 16 “physical” Faders, 3 Layers each 12 “physical” Faders, 4 Layers each | Up to 96 “DSP” faders, 4 layers, with XD3 core, and at least 3 additional DSP cards (52-7530) 96 “physical” Faders (no layers) 48 “physical” Faders, 2 Layers each 32 “physical” Faders, 3 Layers each 24 “physical” Faders, 4 Layers each |
|
| (2) | additional license required: 52-8581 - Enhanced DSP Processing | ||
| (3) | CF/N-1: Clean Feed, mix minus bus, n-1 bus | ||
| (4) | Internal DSP processing is always stereo. Therefore, the maximum number of mono delays is equal to the maximum number of stereo channels. The right channel is unused in case of mono processing. | ||
| (5) | additional license required: 52-8583 - XC/XS Core Control Networking | ||
| (6) | MADI SFP module (52-7593 or 52-7594) required for each SFP cage | ||
| (7) | additional license required: 52-8582 - XC/XD/XS Core Audio Network | ||
| (8) | XC Gigabit Audio port (SFP modules 52-7591 or 52-7592) required | ||
| (9) | GA/MADI SFP cages on XC3 Cores can be used with: - 52-7593/52-7594 MADI SFP modules (DHD license code included) or - 52-7591/52-7592 XC Gigabit Audio port (DHD license code included) for Core-to-Core connections or - to connect Concentrators / MADI Concentrators with their included SFP modules (no DHD license code) |
||
| (10) | GA/MADI SFP cages of the core 52-7524 can be used with: GA 1: 52-7593 or 52-7594 MADI SFP module (include DHD license code) GA 2: 52-7591 or 52-7592 XC Gigabit Audio port (include DHD license code) for Core-to-Core connections for using 2x MADI or 2x GA Core-to-Core-Connection or Concentrators, a 52-1950 license is required. |
||
| (11) | XC3 Dante IP Audio Interface (52-7580 / 52-7585) or XC3 AES67 RAVENNA Interface (52-7567) required for the extension slot | ||
| (12) | Each high priority Output Function can be replaced by two low priority Output Functions. | ||
| (13) | Only MX, RX, SX, DX and TX modules supporting Firmware 10 can be used with a core running Firmware 10 - for system upgrades, check with your local DHD distributor for module compatibility | ||
| (14) | If the core is not used in redundancy mode, the sub-D connector at the rear can be internally reconnected to act as an RS232 port. If the core is used in redundancy mode, the connector at the rear is used for the external redundancy cabling. In this case an additional sub-D connector for RS232 can be installed on request at the side of the core. | ||
| (15) | RS232 port available on request with purchase order | ||
| (16) | additional license required: 52-8546 AES67 RAVENNA 16×16 | ||
| (17) | BNC sync extension 52-7509, needs to be ordered separately to sync to an external wordclock or AES11 sync source. Also the wordclock output will only be provided with this module. | ||
| (18) | XC3 Dante IP Audio Interface (52-7580) or XC3 AES67 RAVENNA Interface (52-7567) required for the extension slot. Note: 52-7585 IPx Dante Audio 512×512 can NOT be used in 52-7500 | ||
| (19) | MADI SFP cages on XS3 Cores can be used with: 52-7593/52-7594 MADI SFP modules (DHD license code included) | ||