Configuration

In general, the SX2 is preconfigured with a default configuration and will work with default values.

To customise the configuration of your SX2 mixing console, SX2Config software or current version of TB9 is required.

The SX2Config software is a Windows program that does not require any additional dynamic libraries (DLL files) or other files. For installation, simply copy the program file to the hard drive. To load the software, double-click on the SX2Config.exe. To remove the program, delete the SX2Config.exe.

When opening SX2Config, another software application is loaded automatically: DHD Communication Server (DHDCS). DHDCS filters TCP/IP and UDP packets from the network that are transferred to and from DHD devices and prepares them for several software applications. See DHDCS Manual for detailed information.

You can use SX2Config without any hardware connected, for example for changing or checking configurations offline. Normally, the configuration PC is connected with the corresponding DHD system using the TCP/IP protocol via Ethernet.

To configure your SX2 device double-click on the SX2Config.exe. After customizing the default values, you have to load your configuration into the SX2 device (Transfer Menu > Load to Device). Now the new configuration is available in the device and can be used.

In the following sections all configurable options are explained.