Differences

This shows you the differences between two versions of the page.

Link to this comparison view

sx:general [2020/06/04 10:41]
sx:general [2021/02/02 14:31] (current)
Line 1: Line 1:
 +<- sx:​connecting|Connecting modules to the XS Core ^ sx:​start|52/​SX Configuration ^ sx:​hardware|Hardware ->
  
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +======Configuration======
 +
 +In general, the 52/SX is preconfigured with a default configuration and will work with default values.
 +
 +To customise the configuration of your 52/SX mixing console, SXConfig software or current version of TB8 is required.
 +
 +The SXConfig software is a Windows program that does not require any additional dynamic libraries (DLL files) or other files. For installation,​ simply copy the program file to the hard drive. To load the software, double-click on the ''​SXConfig.exe''​. To remove the program, delete the ''​SXConfig.exe''​. ​
 +
 +When opening SXConfig, another software application is loaded automatically:​ DHD Communication Server (DHDCS). DHDCS filters TCP/IP and UDP packets from the network that are transferred to and from DHD devices and prepares them for several software applications. See [[dhdcs:​start|DHDCS Manual]] for detailed information.
 +
 +You can use SXConfig without any hardware connected, for example for changing or checking configurations offline. Normally, the configuration PC is connected with the corresponding DHD system using the TCP/IP protocol via Ethernet.
 +
 +To configure your 52/SX device double-click on the ''​SXConfig.exe''​. After customizing the default values, you have to load your configuration into the 52/SX device. Now the new configuration is available in the device and can be used.
 +
 +In the following sections all configurable options are explained.