Hardware

SXConfig Software - Hardware

On the Hardware page you can set which 52/SX modules are connected to your system.

In the Device name box, enter a distinctive device name for this 52/SX mixing console.

Select Type:

• In the left drop-down menu, select 52-1021 or 52-1025 depending on your fader modules.
• In the right drop-down menu, select the number of faders.

Select your core type. (52-1810: Standard 52/XS2 Core; 52-1830: 52/XS2 Core with integrated Multi I/O)

• Use MADI Module 52-7321: If your XS core is equipped with a MADI module 52-7321, please select this check box to enable the inputs and outputs for the I/O Settings tab.
• Use Gigabit Audio 52-7391: If your XS core is equipped with a Gigabit Audio SFP Module, this enables the inputs and outputs in the I/O Settings tab. Gigabit Audio is useful e.g. to interlink with other DHD devices.
• Use Dante module 52-7080: If your 52/XS core is equipped with a 52-7080 internal Dante module.

When you check Use 52-8511 PC TFT View Software, you can additionally assign a hardware module to APC 1. This is possible because you do not need an 52-4018 TFT module.

• APC 8 |Select an I/O type or set the value to (none). Default is 52-1335.
• APC 7 |Select an I/O type or set the value to (none). Default is 52-1335.
• APC 6 |Select an I/O type or set the value to (none). Default is (none).

• APC 4 |Select an I/O type or set the value to (none). Default is (none)

Split: Shows a split version of the control modules in the preview. Flat: Shows the control modules build in a flat table installation frame instead of a console frame.