← User Management  
 File Menu →

Demo Mode

You can operate the DHD Operation Manager (DHDOM) in demo mode. Switching to demo mode is possible by using the demo mode function of the DHDOS.

To enable this demo mode follow these steps:

  1. Start the DHD Operation Server.
  2. In the notification area (in the taskbar), right-click on the DHD Operation Server icon and select OPEN.
  3. On the Administration menu, click Server Preferences.
  4. On the General tab, select the Run Server in DemoMode check box. Click OK.
  5. On the Administration menu, click Data & Devices.
  6. Click Add device.
  7. Select Toolbox Project File and select your Toolbox config file.
  8. In the Select Device list, select the device, which do you want to use for routings. Click OK.
  9. The device shows up in the Device window. Click OK.
  10. Start DHD Operation Manager software.
  11. In the Logon to list, select your device. Click OK.
  12. On the File menu, click Login.
  13. Default Username: Administrator Default Password: DHD Click OK.

Within the demo mode, you are able to edit the configuration of DHD devices, even if you have no physical access to the devices.

Note
Basically, you can use all commands of the software in demo mode as if you are connected to the device. But some functions/displays require an interaction with the device. That is why some options of the DHDOM are not usable in demo mode or are only executed/shown in a simplified way. However, the settings are only saved local and will not be sent into the network.

In the title of the DHDOS and DHDOM windows, you can find an information that the software is running in demo mode.

Cut out of the DHDOS window in DEMO mode.
Cut out of the DHDOM window in DEMO mode.
← User Management  
Operation Manager  
 File Menu →