On-Air Switch
The On-Air Switch
page gives you the possibility to change sources for an output controlled by logic sources.

You can select three stereo audio sources, which can be switched by two logic sources.
On the left-hand side, you can see the audio sources of the On-Air switch. The black lines symbolize audio signal paths. There are two blue-colored signal switches, each with an associated logic sources.
To configure the On-Air switch, follow these steps:
- Click the
button next to the
Source 1L
box, theAudio Sources
window opens. - In the
Audio Sources
window, select a source and clickAssign
. Alternatively, you can double-click on the source or drag it to theSource
box. The source is now assigned to the On-Air switch. - Repeat steps 1 and 2 for the
Sources 1R, 2L, 2R, 3L
and3R
. - The main switch on the right-hand side is assigned by default to the
OnAir
Logic Function. To change the logic source, clickand select another logic source from the
Logic Sources
window. - The switch between
Source 1
andSource 2
has no default logic source and you have to select a logic source ifSource 2
will be used. Clickand select another logic source from the
Logic Sources
window.
The main switch with its default logic source OnAir is already preconfigured in the SX2-System. To switch between Source 3
and Source 1
(or Source 2
) follow these steps:
- Press and hold the
Hold to unlock
button, then press theOn Air
button at the same time. TheOn Air
button turns red.Source 3
is now selected. - To switch back to
Source 1
(orSource 2
), press and hold theHold to unlock
button, then press theOff Air
button at the same time. TheOff Air
button turns green and theOn Air
button turns white.Source 1
is now selected.
In the On Air Switch Signal
area, you can assign the On Air Switch Signal to the Selector List 1
and Selector List 2
. You can find these lists on the Monitor Selector
view of the TFT/Touch Display.
The label and color for the corresponding TFT buttons can be changed in the TFT Key options
area.