Snapshot Options
You can save the settings of Input Gain, Input Processing, Input Routing, Summation, Aux and Clean Feed of all fader channels of the mixer as a mixer snapshot and load them again later on. The same is possible for the separate channels, thus saving/loading all Input Gain and Input Processing settings for a channel selected via ACCESS (see also Snapshot Functions).
In the project tree, select <Device>/<Mixer>
. Select the Snapshot Options
tab . Here you can select which functions and contents are saved in a snapshot.
Mixer Snapshot Options
Snapshot Group ID
Virtual Mixers that should interchange mixer snapshots should have the same Snapshot Group ID.
Snapshot content
option | description |
---|---|
Channel Parameter | Save the parameters of all channels in the mixer snapshots. |
Channel Assignment | Save the assignments of the defined fader channels to the physical faders in mixer snapshots. |
Channel Names | If you have changed the channel names with the Snapshot Manager Software of DHD Operation Manager and you want to load these new names, you have to activate this function. Otherwise, the default names, which are defined in the Toolbox5 will be loaded. |
Snapshot Logics | Save the status of the snapshot logics in mixer snapshots. |
PFL Options | Include the PFL selections for all channels that is selected when saving when saving a Mixer Snapshot. |
Bus Routing | Save the settings of the Bus Routings for all channels in mixer snapshots. |
Fader Values | Save the fader positions of all channels in mixer snapshots. |
VCA Assignment | Save the VCA assignment of all channels in mixer snapshots. |
Combined Logics | Save the assignment of a channel to a combined logic in mixer snapshots. Saves not the status of a combined logic. |
Selectors | Save the source selections in mixer snapshots. Note: You have to enable each selector that should be affected by this saving option. (See Monitor Functions) |
Software Potentiometer | Save the software potentiometer values in mixer snapshots. Note: You have to enable each software potentiometer that should be affected by this saving option. (See Potentiometers - Assigning Potentiometers) |
Fixed Processing | Include the settings of the fixed processing when saving a mixer snapshot. |
Channel Voice/Music assignment | Save the assignment of channels to voice bus or music bus in mixer snapshots. |
When loading snapshot...
option | description |
---|---|
Overwrite current settings | Overwrites all settings of all channels immediately after loading a mixer snapshot. |
Acknowledge each Channel | • Overwrites all settings of all channels with closed faders immediately after loading a mixer snapshot. • The ACCESS keys of all channels with opened faders start flashing. Press the ACCESS key to confirm the loading process for each single channel. |
Acknowledge Once | • Overwrites all settings of all channels with closed faders immediately after loading a mixer snapshot. • The ACCESS keys of all channels with opened faders start flashing. Press one of these ACCESS keys to confirm and all settings of all channels with opened faders will get overwritten. |
Channel Snapshot Options
Snapshot content
option | description |
---|---|
Channel Parameter | Include the parameters of a channel when saving a channel snapshot. |
Bus Routing | Include the settings of the bus routing for a channel when saving a channel snapshot. |