View Types and Options

In the project tree, in the subsection <Device>\Views, you can create different views that are shown on the TFT displays.

Views page

For fader views and master views, you can use the same type of TFT display and operating elements (the timer function is the only one that is only applicable in a master view). Only the possible arrangement of the elements differs a bit.

TFT Views: Click Add to choose between Fader View and Main View

Example Master View on a TX

A master view can be created as required using the whole area of the TFT display. Master Views can be assigned to any TFT. Master views can also be Access Views.

To add a new Master View, in <device>/TFT Views click Add View in the Available Views area.

A new Master View is created which has no defined size until you select a display type.

In the View Options area on the right hand side, under Preferred display type, decide which kind of display it is for.

• 4015 Control View is only kept for compatibility.
• 4018 Control View has the size of a 52-4018 TFT and can also be used for 52-4010 TFTs. 52-4010 TFTs will show the small 52-4018 View with grey borders. Use this option also for 52-1114 (52/DX) TFTs.
• 4010 Control View has the size of a 52-4010 or 52-4012 TFT and can also be used for 52-4018 TFTs. 52-4018 TFTs will only show the upper left part of the View and cut them.

To set a Master View as Default display for a specific TFT, go to <device>/<mixer>/Console. Click on the TFT you want to use for the Master View. On Module Options area, select a Default View.

An Access View is always active when you set access on a channel which is in the same access Group. Access Views are always Master Views. Mostly, they are used for e.g. channel input properties.

The Access View is active as long as the access is active. To set access and access view, it is useful to create a Button with Access key function and check Set Access View. Alternatively, a Button can be created with key function Access View. As long as active, the access view is active and TFT will jump into access view when pressing access button.

When you create a new view, you have to do some configuration. The configuration is made on the View Settings area on the right hand inside in the View Options tab.

• View Name: After creating a new view, define a distinctive name.
• View Group: Buttons with Key Function Set View will check the current View Group. As long as the user stays in views with the same View Group, the Button will be enlighted (active). Useful e.g. for EQ or dynamics pages with more than one View.
• Preferred Display Type: Choose the display you want to create the view for. This parameter is vital for the size of the created view and the view editor. Possible configurations:
  • Free(250×250 Grid Units)
  • 4015 Control View
  • 4018 Control View
  • 10.1“ Control View
  • 5810 Vertical Control View
• Background Image: Select a background image. For more information on resolutions and image files, see Resource Files.