Authorisation Overview

If you want to lock buttons and to authorize only certain users to use these pushbuttons, follow these steps:

1. In the project tree, select Global Control/Administration. On the Authorisation tab you need to create at least one authorisation group (see Authorisation - Authorisation Groups).
2. Select the User Accounts tab and create at least one user. In the Member of Groups area, assign the users to the desired user groups and define a personal PIN for each user (see User Accounts).
3. In the project tree, select <Device>/<Mixer>/Console. On the Authorisation tab, select the respective buttons one after the other and define which authorisation groups are allowed to use these buttons (see Authorisation - Limiting Access to Keys).
4. Finally, you have to define two logic sources you want to use at the console to enable the PIN input. Therefore, in the project tree, select <Device>/<Mixer>. On the Authorisation tab (see Authorisation - PIN Input Conditions) select two logic sources. To login at the console, these two logic conditions need to be true at the same time for approximately 3 seconds (e.g., pressing two buttons). Every digit of the PIN needs to be chosen with the main encoder and must be confirmed with the OK key.